Fleetsync: Alphanumeric 2-Way Paging Function; S Elcall (S Elective C Alling ); Status M Essage - Kenwood TK-5720 User Manual

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION

FleetSync is an Alphanumeric 2-way Paging Function, and is a protocol owned by
Kenwood Corporation.
Note: This function is available only in analog operation.
S (S
elcAll elecTive
A Selcall is a voice call to a station or group of stations.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall + Status to enter Selcall
mode.
3 Press /
• If Manual Dialing is enabled, you can directly enter the station ID using the
microphone keypad
4 Press the microphone PTT switch and begin your conversation.
■ Receiving
An alert tone will sound and the transceiver will automatically enter Selcall
mode. The calling station's ID will appear when a Selcall is received. You can
respond to the call by pressing the microphone PTT switch and speaking into
the microphone.
■ Identification Codes
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.
Each transceiver has its own ID.
• Enter a Fleet number (00 ~ 349) to make a group call.
• Enter an ID number (000 ~ 4999) to make an individual call in your fleet.
• Enter a Fleet number and select "ALL" ID to make a call to all units in the selected
fleet (Fleet call).
• Select "ALL" Fleet and enter an ID number to make a call to the selected ID in all
fleets (Supervisor call).
• Select "ALL" Fleet and "ALL" ID to make a call to all units (Broadcast call).
S m
TATuS eSSAge
You can send and receive 2-digit Status messages which may be decided in your
talk group. Messages can contain up to 6 alphanumeric characters. Status
messages range from 0 to 99 (0 ~ 99 are reserved for special messages).
A maximum of 5 received messages (combined status messages and short
messages) can be stored in the stack memory of your transceiver.
4
c )
Alling
to select the station you want to call.
.