Get Started; Install Batteries; Connect Power; Turn On - Philips AZM310 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Install batteries

Note
•
You can use both batteries and AC power as power
supply of this device.
1
Open the battery compartment.
2
Insert 6 x LR6/AA Cells batteries (not
supplied) with correct polarity (+/-) as
indicated.
3
Close the battery compartment.

Connect power

Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Note
•
Install the device near the power supply socket and
where the AC power plug can be easily reached.

Turn on

After connecting the power, the device switches
to the last selected source automatically.
Switch to standby mode
Press to switch the device to standby mode.
DC IN
EN 7