GE 175D1807P283 Owner's Manual page 17

Possible Causes What ToDo
Pilling
Result of normal wear on
poly-cotton blends and
fuzzy fabrics
° While this is not cruised by tile washer, you can slow tile
pilling process by washing gmmen/s inside out.
Grayed or yellowed Not enough detergent ° Use more detergent (especially xddl lmger loads).
clothes
Hard water • Use a water conditioner like Calgon brand or ins/all
a w; ilel soJ[enel.
Water is not hot enough ° Make sure water healer is delivering wa/el a/
120°F.-140°F. (48°C.-60°C.).
Washer is overloaded ° Select load size to match clothes load.
Detergent is not • Add detergent as wash basket fills xddl water betbre you
dissolving load clothes.
Dye transfer • Sort clothes by color. Iftitbfic label stales wash
soparatolv,
unstable dyes may be indicated.
Washer is noisy Washer is uneven ° Make sure washer is level and firln to tile floor.
Washer load is ° Push the Cycle knob in to stop the washer, open the lid
unbalanced and re_fistfibute the load evenly. (',lose the lid and restmt.
Washerpausesin cycle The washer normally pauses
between washing steps
Clothes too wet
Incorrect cycle selected ° Make sure the {ycle selected inatches the load you ave
washing.
17