Toshiba ESTUDIO170F Operation Manual page 34

Drum Unit Replacement - continued
Attach the new
4
Drum Unit to the
Toner Cartridge
Take the new Drum Unit from
its shipping carton.
Match the colored parts in the
lower area of the new Drum
Unit with the same colored
parts in the lower area of the
Toner Cartridge.
32
Install the Toner
5
Cartridge and New
Drum Unit
Install the Process Unit along
the Guide in the machine.
Make sure the Process Unit is
inside the machine as far as it
will go.
NOTE:
Pressing in the Process
Unit forcibly could damage
the machine.
CAUTION:
Always hold the Process
Unit by the green handle.
6
Close the Front
Cover
Press up the Front Cover until
it clicks to attach securely.
7
Reset the Drum
Counter
Perform the following procedure
to reset the Drum Unit counter
after you replace the Drum
Unit.
Press:
MENU
+
+
+
+
RESET DRUM COUNT
2.NO
1.YES
NOTE:
Keep in mind that the drum
warning does not disappear
unless this operation is per-
formed.
8
Reset the Drum
Counter - continued
Press:
RESET DRUM COUNT
ARE YOU SURE ?
Press:
COMPLETED
Displayed for 2 seconds
Return to display the SETUP
menu screen.
NOTE:
You must reset the drum
counter when you replace
the Drum Unit.
Never perform this operation
on any other occasion.