Table of Contents
Advertisement
Main Menu
o
Use the Arrow buttons to select the desired Alarm Record Speed.
Alarm Record Speeds:
NTSC: 60, 30, 20, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1.
PAL: 50, 25, 17, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu
o
Use the Arrow buttons to select the desired Record Quality. Select High,
Med or Standard.
Higher record qualities use lower compression, requiring more disk space.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
4.5 Main Menu
Use this menu to specify what status information will be displayed on
the primary monitor. Select On or Off, for the following items.
The current time and date.
The remaining amount of time before the hard disk runs
out of record space.
The time and date of the last alarm.
The Record or Playback Speed.
During Playback, the time and date the recording was
made.
Main Menu
o
To display the current Time and Date near the upper right hand corner of the primary monitor,
select ON. Use the Arrow buttons to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Kalatel VDR
Record Settings
--OR—
Record Settings
--OR—
Display Settings
Display Settings
--OR—
4-6
Alarm Record Speed
Video Quality
Current Time / Date
Alarm Record Speed
Pictures Per Second
60p
Record Quality
Select Quality
High
Current Time / Date
Record Capacity
Last Alarm
Record Playback Speed
Playback Time / Date
0150-0255C
OFF
ON
Advertisement
Table of Contents
