GE VG2053/VG4053 User Manual page 13

Using the Remote Control
VCR Function Buttons
(Continued)
PAUSE
Pauses action for viewing during
playback. Press PAUSE again to resume
normal playback.
Pauses recording to prevent recording of
unwanted scenes.
Also, lets you pause a recording, then
resume the recording.
PLAY
Plays a tape.
POWER
Turns the VCR on and off.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel, then select another.
Press PREV CH to switch between the
two channels.
REC (Record)
Starts the VCR recording.
REW (Rewind)
Rewinds the tape when the VCR is
stopped. Rewinds in high speed when
you press REW when a tape is
rewinding.
Searches the picture in reverse motion
during playback—5 times normal speed
in SP mode, 9 times normal speed in LP
mode and 15 times normal speed in
EP mode.
SKIP
Advances the tape 60 seconds during
playback.
SLOW
Plays a tape in slow-motion. This feature
is not available on the model VG2053.
SPEED (Tape Speed)
Selects a recording speed
(SP, LP, EP).
STOP
Stops the VCR's normal functions such
as record, playback, rewind, fast
forward, and pause.
TRACKING up or down
Reduces the streaks that may appear on
the picture.
Reduces picture "jitter" during pause. In
the model VG4053, reduces the streaks
during slow motion playback.
TV•VCR
Switches the picture signal so that it
either comes from the VCR or the TV
channel.
11