Cisco TelePresence SX20 Codec
Contents
Introduction
xStatus Video Input DVI [2] SignalState
Shows the signal state for the DVI-I input.
Unknown: The signal format is unknown.
OK: A signal is detected and the signal format is supported.
Unsupported: A signal is detected, but the signal format is not supported.
Value space of the result returned:
<Unknown/OK/Unsupported>
Example:
xStatus Video Input DVI 2 SignalState
*s Video Input DVI 2 SignalState: OK
** end
xStatus Video Input USB 3 Connected
Shows if there is something connected to the USB connector. Not all connections can be detected.
Value space of the result returned:
<True/False/Unknown>
Example:
xStatus Video Input USB Connected
*s Video Input USB 3 Connected: False
** end
xStatus Video Input USB 3 SignalState
Shows the signal state for the USB input.
Unknown: The signal format is unknown.
OK: A signal is detected and the signal format is supported.
Unsupported: A signal is detected, but the signal format is not supported.
Value space of the result returned:
<Unknown/OK/Unsupported>
Example:
xStatus Video Input USB SignalState
*s Video Input USB 3 SignalState: Unknown
** end
xStatus Video Output
Shows the top level overview of the video output status.
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API
xConfiguration
xStatus Video Output HDMI [n] MonitorRole
xStatus Video Output HDMI [1, 2] Resolution Height
xStatus Video Output HDMI [1, 2] Resolution Width
184
xCommand
Describes which video stream is shown on the monitor connected to the video output HDMI
connector.
First/Second/Third/Fourth: The role of the monitor in a multi-monitor setup. In a singlemonitor setup,
there is no difference between First, Second, Third and Fourth.
PresentationOnly: Shows presentation video stream if active.
Recorder: Shows all participants, including the local main video. If active, shows also the
presentation.
InternalSetup: Determined by the system, when xConfiguration Video Output HDMI [n] MonitorRole
is set to Auto.
Value space of the result returned:
<First/ Second/ Third/ Fourth/ PresentationOnly/ Recorder/ InternalSetup>
Example:
xStatus Video Output HDMI 1 MonitorRole
*s Video Output HDMI 1 MonitorRole: First
** end
Shows the resolution height (in pixels) for the video output HDMI.
Value space of the result returned:
<120..3000>
Example:
xStatus Video Output HDMI 1 Resolution Height
*s Video Output HDMI 1 Resolution Height: 720
** end
Shows the resolution width (in pixels) for the video output HDMI.
Value space of the result returned:
<176..4000>
Example:
xStatus Video Output HDMI 1 Resolution Width
*s Video Output HDMI 1 Resolution Width: 1280
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.