Page 1
Always there to help you GoGEAR Register your product and get support at www.philips.com/welcome Question? SA5DOT Question? Contact Contact Philips Philips User manual...
4 Play music Transfer music to the player Play music Search for a song Change the volume level Switch the random play on or off 5 Update the firmware through Philips Device Manager 6 Troubleshooting 7 Technical data PC requirements Need help? Please visit www.philips.com/welcome...
Back up your files. Ensure that you retain the original The maximum output voltage of the player is files you have downloaded to your device. Philips is not not greater than 150 mV. responsible for any loss of data if the product becomes Wide band characteristic voltage WBCV:>=...
Data logging Philips is committed to improving the quality of your product and enhancing the Philips user experience. To understand the usage profile of this device, this device logs some info / data to the non-volatile memory region of the device.
Page 6
Please inform yourself about the local rules on Warning separate collection of batteries. The correct • disposal of batteries helps prevent potentially Removal of the built-in battery invalidates the warranty and can destroy the product. negative consequences on the environment and •...
Note • Press: Decrease or increase the volume • • Press and hold: Skip to the previous or The images serve as reference only. Philips reserves the right to change color/design without notice. next song • 3.5 mm-headphone connector...
d LED indicator e USB connector for power charging and data transfer f RESET • Press the hole by using the tip of a ball pen when the player does not respond to the pressing of keys LED indicator and audio feedback With the LED indicator and/ or audio feedback, you can know the status of the player.
3 Get started » Power on: The green indicator lights up. Music play starts. » Power off: The red indicator lights up. One beep sounds. Charge power MINIDOT/FITDOT has a built-in battery that can be charged through the USB connector of a computer.
• you have listened at a high volume level for 20 hours. With the feature of volume reminder, the Philips MP3/MP4 player complies with the European You can transfer music from your PC media Union regulations (EN 60950-1) in protecting library to MINIDOT/FITDOT in the following your hearing safety.
Switch the random play on or off During music play, press twice. » You hear two beeps. The green indicator flashes twice at intervals. » Songs play in random. To switch off the random play, press twice again. » You hear one beep. The green indicator flashes once at intervals.
Computer (Windows Vista / Windows 7 / 8). To check for firmware updates, Right click on the Philips GoGear MINIDOT/FITDOT icon. Select Install a Close the dialog box of Philips Device Philips Device Manager. Manager. Alternatively, click the Philips GoGear •...
Page 13
Update the firmware When the firmware update is available, follow the onscreen instructions to download and install the firmware. Disconnect MINIDOT/FITDOT from the » MINIDOT/FITDOT restarts after the firmware is updated and is ready for use again,...
Keep holding the button until Philips Device Manager recognizes MINIDOT/FITDOT and enters the recovery mode. Start the recovery process: a On Philips Device Manager, click the Repair button. Follow the onscreen instructions to complete the recovery process. b When the recovery is completed, disconnect MINIDOT/FITDOT from your PC.
• Fast charging: 6-minute charging for • ³ Transfer speed depends on operating system and 60-minute play software configuration. Software Philips Device Manager: To update the • firmware and recover the player Connectivity PC requirements • Headphone 3.5 mm •...
Need help?
Do you have a question about the GoGear SA5DOT and is the answer not in the manual?
Questions and answers