CONTENTS ------------------------------------------------------------------------------------------------ SAFETY AND SET-UP Safety Setting up Cleaning MOUNTING Mounting the Audiorama 9000 on the ceiling Setting up the Audiorama 9000 with a standsupport CONNECTION Connecting the Audiorama 9000 INFORMATION Technical data Service information for dealers Environmental note...
The stereo effect is thus excellent and never blurred. This frees you to select the arrangement of the speakers based on optical considerations. For optimum stereo effect, the Audiorama 9000 speakers should be placed at a distance of between two and four meters from one an- other, depending on the room size.
Note: If the Audiorama 9000 is to be used in a professional environment (e.g. in a café), it must be installed by a qualified electrician in ac- cordance with the valid installation specifications of VDE 0100.
Setting up the Audiorama 9000 with a stand support As an alternative to mounting the Audiorama 9000 on the ceiling, you can also set it on a stand support. The stand support is available as an accessory from your dealer.
CONNECTION ---------------------------------------------------------------------------------- Connecting the Audiorama 9000 The nominal load of your Audiorama 9000 may not exceed 120 watts. The rated impedance of your Audiorama 9000 is 4 Ohm. Please note that the amplifier used must be able to accomodate a minimum impedance (acc.
Need help?
Do you have a question about the Audiorama 9000 and is the answer not in the manual?
Questions and answers