Control Pad Features - Kenmore ELECTRIC BuILT-IN OVEN Use & Care Manual

Control Pad Features

Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same.
READ THE INSTRuCTIONS CAREFuLLY BEFORE uSING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
Oven Interior Clock
Light Pad— Pad—
Used to turn Used to
oven interior set the
light ON and time of
OFF. day.
Timer Pad—Used
to set or cancel
the minute timer.
The minute timer
does not start or
stop cooking.
Clean Pad—
Delay Start Pad—
Used to select
Used to set the
the Self-Cleaning
desired start time for
cycle. A 2, 3 or 4
baking. May be used
hour Self-Clean
with COOK TIME to
time may be
program a delayed
selected.
bake cycle or a
delayed clean cycle.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation.
1. To tell if your oven is set for normal or silent operation press and hold
in the display.
2. Within 5 seconds, press the
display will show either "- -" or "SP".
3. Wait 5 seconds to return to normal operating mode.
If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation
mode.
Temperature Conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be pro-
grammed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press and hold
2. Press the or
3. Wait 5 seconds to accept the changes or press
Cook Time up and Down Arrows pads—
Pad—Used
Used along with the function pads
to enter the to select oven temperature, cook
length of time, start time (when programming
the baking an automatic start time), time of
time. day, clean time and minute timer.
Oven, Preheat & Door Locked Lights*—The
"Oven" light will glow when the oven unit is
turned on. The "Preheat" light will glow when
the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven
temperature. The "Door Locked" light will flash
until the door locks when the self-clean cycle is
in use. It glows constantly after the door locks.
or pad to switch between normal sound operation and silent operation mode. The
(Fahrenheit / Celsius)
for 7 seconds until °F or °C appears in the display.
pad to change °F to °C or °C to °F.
Add 1 Minute Pad—Used
to add 1 minute to the Timer
Count-down. This feature works
with the Kitchen Timer only and
does not affect any cook time
or start time functions.
to reject the changes.
7
Bake Pad—Used
to select the bake
function.
Feature Indicator
Lights— These
light to show
which feature is
in use.
Broil Pad—
Used to select
the variable
broil function.
Warm Pad—
Used to set the
Warm feature.
Stop Pad— Used to clear any
function previously entered except
the time of day and minute timer.
Press STOP CLEAR to stop
cooking. Also the STOP CLEAR
pad is used to activate oven
lockout setting.
for 7 seconds. "- -" or "SP" appears