Setting Up The Output Relay Schedule - Bosch NetDVR User Manual

NetDVR.book Page 31 Wednesday, May 12, 2004 4:06 PM
NetDVR | User's Guide | Configuring the NetDVR

3.10.8 Setting up the output relay schedule

Click the "Relay" Setup button.
Time Table
• A day can be divided into 5 time zones
between 0:00 and 24:00. The time zones
for the relay output can have its own
schedule or the schedule of (one of) the
channels can be entered.
• First define which Relay must be operated
manually from the Live Viewer. The
manual selection is exclusive for that relay
output; all other check boxes are disabled.
• Fill in the matrix of alarm trigger inputs
'Motion Detect CH1 ~ CH4' or 'Sensor
Input 1 ~ Input 4'.
Click on the OK button to confirm the settings and return to the 'Schedule' main screen.
Click the "Apply" button to upload the settings into the NetDVR.
Bosch Security Systems | 2004-01
31