Refer to the rating plate on your cooktop for the KW rating for your cooktop. Proper installation is the responsibility of the ® installer. Product failure due to improper installation is not covered under the GE Appliance Warranty. See the Owner’s Manual for warranty information. For Monogram local service in your area, 1.800.444.1845.
Make sure the wall coverings, countertop and cabinets around the cooktop can withstand heat (up to 200°F) generated by the cooktop. Electronic Radiant Cooktop GE Monogram® Installation Instruction 30" Electric Radiant Cooktop...
Tools & Materials Needed Materials Required Junction Box Minimum The following MINIMUM clearance dimensions must be maintained. Clearances Overall Cooktop Dimensions 20 7/8" 3 1/4" Preparing the Opening Tools You Will Need Wire Nuts 13" MAX. Depth of unprotected overhead cabinets 36"...
Vertical Five inches (5″) minimum vertical clearance between Clearance the cooktop bottom and any combustible surfaces. Cutout To insure accuracy, it is best to make a template when cutting the opening in the Dimensions counter. Make sure there is clearance of the inside the cabinet before cutting the Countertop...
Attach Apply the foam strips around the outer edge of the glass. Do not overlap the foam strips. Foam Strips Locate Remove the hold down brackets and screws from the literature package. Mounting Parts Attach Screw the Hold Down Bracket to the side of Brackets to the cooktop unit.
When making the wire connections, use the entire length of conduit provided. The conduit must not be shortened. Step With the cooktop in place, open the front of the cabinet door. Step Insert the wires from the conduit through the opening of the junction box.
NOTE: While performing installations described in this book, safety glasses or goggles should be worn. To obtain specific information concerning any Monogram product or service, call GE Answer ® Center consumer information service at 800.626.2000—any time, day or night or visit our website at: Monogram.com.