Change Volume Control - Cisco AT8560 User Manual

Change Volume Control

Your remote is originally programmed in one of the following ways:
• The remote controls volume for one device, such as your TV, whether the
remote is in TV, VCR, DVD, or CBL mode. The AUX mode always retains
separate volume control.
• The remote controls volume for diff erent devices, depending on the mode
key you press. For example, in CBL mode, the volume keys control the set-
top. However, in TV mode, the volume keys control the TV.
Try your remote to see how the volume control currently works. The volume
keys include
complete the procedure that fi ts your needs.
Controlling Volume for One Device (Program Code 9 9 3)
Note: If you want to assign volume control to a Cisco set-top, complete the
following prerequisite steps. Press SETTINGS to access the General Settings
on-screen menu. Then, verify that the Audio: Volume Control setting is set to
Variable.
1. Press and hold SELECT and CBL until all mode keys blink twice.
2. Press 9 9 3. The CBL key blinks twice.
3. Press the mode key for the device the volume keys should control. For
example, if you want to control volume through your TV, press TV. All mode
keys blink three times.
Notes:
• The volume keys control only one device whether you are in CBL, TV, DVD,
or VCR mode.
• In AUX mode, the remote always controls volume for the device assigned to
the AUX key.
Controlling Volume for Diff erent Devices (Program Code 9 9 3)
1. Press and hold SELECT and CBL until all mode keys blink twice.
2. Press 9 9 3. The CBL key blinks twice.
3. Press SELECT. All mode keys blink three times.
Result: After you press SELECT, the volume keys control the device
assigned to that mode. For example, in TV mode, the volume keys control
volume for the TV only.
, and MUTE. If you want to change the volume control,
13