Turning The System Off - Bosch Security Systems User Manual

Turning the System Off

You turn off your security system by entering your personal passcode.
When the system is on, you must enter through a designated entry door to
prevent an instant alarm condition. Opening a designated door starts entry
delay time and the keypad emits a pulsing beep tone to remind you to turn
the system off. Enter your passcode before the delay time expires to turn
the system off.
If you enter through the wrong door or fail to turn the system off before
the entry delay time expires, you may cause an alarm. If this happens,
silence the alarm (by entering your personal passcode) and call your
security company to let them know that it is not an emergency situation.
1. When the system is on, the On light is lit. If the system is All On,
the display shows:
If the system is Part On, the display shows:
2. Enter your passcode to turn the system off. The idle display is
shown.
12
ALL ON
SYSTEM OK
PART ON
SYSTEM OK