If The Picture Freezes And The Front Panel And Remote Control Buttons Stop Working - Pioneer LX01 Operating Instructions Manual

Hdd/dvd recorder home cinema system
Hide thumbs Also See for LX01:
Table of Contents

Advertisement

Additional information
Problem
HDMI Control does not
respond
If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the
outlet and insert again to return to normal operating conditions.

If the picture freezes and the front panel and remote control buttons stop working

• Press  (Stop) then try restarting playback.
• Press the front panel  STANDBY/ON button to
switch the power off, then switch back on and restart
playback. If the power fails to switch off, press and
hold  STANDBY/ON for five seconds until the
power switches off.
Remedy
• Verify that the HDMI cable is firmly connected (page 65).
• Check whether HDMI Control is set to On for this recorder, the receiver subwoofer and the
device connected to this recorder. For more information, refer to the operating instructions of
your Flat Screen TV and HDMI Control on page 44.
• Depending on the type of Flat Screen TV, some HDMI input terminals do not support the
HDMI Control function. For details, see the operating instructions supplied with your Flat
Screen TV.
• HDMI Control may not operate properly if you do not use a High Speed HDMI cable.
• This function may not work properly if you have multiple recorders connected to a single
Flat Screen TV or the receiver subwoofer. For more information refer to the operating
instructions of your Flat Screen TV and HDMI Control on page 44.
• Controls may not function properly in certain situations, such as immediately after you
have connect an HDMI cable, turn this recorder's power off or remove the power cable for
this recorder or the connected component. If you experience any problems, set HDMI Control
to On for all connected units, and then display the pictures stored on this recorder on your
Flat Screen TV to improve the situations.
• Check whether the connected component supports HDMI Control or not.
• Certain functions are not supported on with Flat Screen TVs.
• We cannot guarantee this recorder will work with HDMI Control-compatible components
other than those made by Pioneer. When using HDMI Control-compatible components
manufactured by companies other than Pioneer, set the HDMI Control to Off (page 159).
STANDBY/ON
STANDBY/ON
DV IN
USB
16
STOP
OPEN/
PLAY
STOP
REC
STOP REC
CLOSE
169
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx-lx70swSsp-lx70stSdvr-lx70dAs-lx70

Table of Contents