Connecting the Hypercom Device
PROCEDURE:
XE-A207
XE-A23S
XE-A407
XE-A43S
4
Equinox-Hypercom Setup GUIDE
XE-A507
Power
COM
STEP 1
Connect the RJ-11 end of
the serial cable to the
Equinox/Hypercom Device
STEP 2
Connect the DB-9 end of
the cable to the COM port
on the back of the register
NOTE: On registers with two
(2) COM ports, the cable
should be connected to COM2
STEP 3
Plug in the
Equinox/Hypercom device
power supply
M
edia
S
ystems
G
roup