Connecting The Receiver; Connecting The Receiver To The Antenna - Silvercrest SL 65 T Operating Manual

Connecting the receiver

Connecting the receiver to the antenna

Caution!
Remove all plastic wraps from the receiver before connecting it to
the antenna. Otherwise the receiver can suffer damages.
Danger of overheating.
Connect the receiver to the antenna using an antenna cable.
The coaxial cable is not included in the scope of supply.
Caution!
Connect the receiver to the mains supply only after you have
connected it to all equipment and the antenna properly. Otherwise
the receiver can suffer damages.
The wire netting and the inner core of the coaxial cable carry
current during operation if the 5V supply voltage is activated.
Connecting the receiver
15