Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Voodoo Lab PEDAL POWER 2
Summary of Contents for Voodoo Lab PEDAL POWER 2
- Page 1 PEDAL POWER User’s Manual...
- Page 2 This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any means or in any form without the express prior consent in writing from Digital Music Corporation. Voodoo Lab and Pedal Power are trademarks of Digital Music Corp.
- Page 3 This insures reliable operation, free of hum and noise. The new Pedal Power 2 will also power Line6 modeling pedals and includes two variable voltage outputs to simulate worn batteries. Please take the time to read this entire manual before operating your Voodoo Lab Pedal Power.
- Page 4 Don’t worry, we respect your privacy and never sell our mailing list. System Unit Description AC auxiliary. This is a courtesy AC outlet for convenient powering of AC powered effects or a MIDI foot controller. Note the 200 watt maximum rating. Do NOT plug in your amp here! AC power input jack.
- Page 5 NORMAL 6. SAG controls (not shown). Next to output jacks 7 and 8 are controls to vary the voltage from 4-9V. About Pedal Boards Before connecting the Pedal Power to your pedals, let’s talk about pedal boards. The best installation is to mount your pedals and power supply to a suitable pedal board.
- Page 6 If you have a pedal which has no power jack at all, but it runs on a single 9V battery, you can still power it using your Voodoo Lab Pedal Power. Use the cable with the 9V battery snap on one end.
- Page 7 When powering Boss pedals that require ACA adapters you must use outputs 1-4 only and switch the corre- sponding Voltage Selector DIP Switch on the Voodoo Lab Pedal Power to the “ON” position. For example, let’s say you have a Boss CS-3 Compressor/Sustainer.
- Page 8 It is not recommended for digital pedals. More About Cables The DC power cables supplied with your Voodoo Lab Pedal Power 2 are suitable for most common pedal effects. If you need additional cables they are available directly from Digital Music. If you need cables of a different length, with reversed polarity, or with a special connector, contact us and we can provide them for you.
- Page 9 Control switching system), we usually mount the Pedal Power along with the pedal effects on a sliding shelf. What if my pedal uses reversed polarity (positive ground)? Because the Pedal Power has each of its DC outputs isolated, it doesn’t matter whether your pedals are negative or positive ground.
- Page 10 How can I get additional DC power cables? Contact Digital Music to obtain additional cables. What if I need a special cable? Our Digital Music Custom Shop can provide any cable you need. What is a toroidal transformer and why does my Pedal Power have one? Power transformers create an magnetic field that can cause hum and noise in your effects.
- Page 11 RMA and given shipping and packaging instructions. How to Reach Us All Voodoo Lab products are manufactured by Digital Music. You can reach us by any of the following: Tel:...
Need help?
Do you have a question about the PEDAL POWER 2 and is the answer not in the manual?
Questions and answers