User Connections - Bosch 700 Series Information

7 | AUTODOME 700 Series IP PTZ Camera
Pre-positions 99, each with a 20-character title
Guard Tours Two (2) types of tours:
• Recorded tours – two (2), total
• Preset tour – one (1), consisting of up
Supported English, Chinese, Dutch, French, German,
Languages Italian, Japanese, Polish, Portuguese, and
Spanish

User Connections

Power, Camera 21-30 VAC, 50/60 Hz
Power, Heater 21-30 VAC, 50/60 Hz
Video and Control RJ-45 100 Base-TX Ethernet
Alarm Inputs (2) Programmable for "normally open" or
"normally closed"
Open Collector 32 VDC @ 150 ma max.
Output (1)
Audio Input Line
Level
(one way audio)
• Input Voltage 5.5 Vp-p max
• Impedance 9 Kohm typical
Environmental
In-Ceiling
Design Rating IP54 ,
6
Plenum rated
Operating Temp. –10°C to 40°C
(14°F to 104°F)
Storage Temp. –40°C to 60°C
(–40°F to 140°F)
Humidity 0% to 90% relative,
non-condensing
6. With optional VGA-IP54K-IC78 kit.
7. Without heater connected in power supply box for indoor applications.
8. Meets requirements for NEMA 4X certification with use of a polycarbonate bubble. Meets requirements for NEMA 4X,
except impact test, with use of an acrylic bubble.
Construction
Dimensions See dimensional drawings
Weight
• In-ceiling 2.66 kg (5.86 lb)
• Indoor Pendant 2.88 kg (6.3 lb)
• Outdoor Pendant 3.32 kg (7.3 lb)
Bubble Size 153.1 mm diameter (6.03 in.)
duration 15 minutes
to 99 scenes, consecutively
Pendant
IP66
8
–40°C to 50°C
(–40°F to 122°F)
or
–10°C to 40°C
(14°F to 104°F)
7
–40°C to 60°C
(–40°F to 140°F)
0% to 100% relative,
condensing
Construction Material
• Housing Cast aluminum
• Bubble Pendant: Acrylic (high-resolution)
In-ceiling: Polycarbonate (rugged)
Standard Color White (RAL 9003)
Standard Finish Powder coated, sand finish
Mounts/Accessories
Bubbles
In-ceiling
Clear rugged polycarbonate
Tinted rugged polycarbonate
Pendant
Clear rugged polycarbonate
Tinted rugged polycarbonate
Clear high-resolution acrylic
Tinted high-resolution acrylic
Pendant Arm Mounts
Wall Arm (No Transformer)
Wall Arm (120/230 VAC Transformer)
Pendant Arm with Wiring
Mounting plate for VGA-PEND-ARM
Trim skirt for VG4 Series Power Supplies
Optional Mounting Plates for Arm Mounts
Corner Mounting Plate
Mast (Pole) Mounting Plate
Pendant Pipe Mounts
Pipe Mount Cap
Pendant Roof Mounts
Roof (Parapet) Mount
(VG4-A-9543 Pipe Mount Cap required. Available separately.)
Optional Mounting Plates for Roof Mounts
Flat Roof Adapter for Parapet Mount
In-ceiling Support Kits
Bracket for suspended or drop ceilings
Gasket kit for IP54 certification
Power Supplies
Outdoor Power Supply Box, no transformer
VGA-BUBBLE-CCLR
VGA-BUBBLE-CTIR
VGA-BUBBLE-PCLR
VGA-BUBBLE-PTIR
VGA-BUBBLE-PCLA
VGA-BUBBLE-PTIA
VG4-A-PA0
VG4-A-PA1 /
VG4-A-PA2
VGA-PEND-ARM
VGA-PEND-WPLATE
VG4-A-TSKIRT
VG4-A-9542
VG4-A-9541
VG4-A-9543
VGA-ROOF-MOUNT
LTC 9230/01
VJR-A3-SP
VGA-IP54K-IC78
VG4-A-PSU0