What To Do If; Cleaning Condenser/Drum; Troubleshooting - Zanussi ZDC37200W User Manual

Cleaning condenser
Important!
• Never operate the dryer without condenser.
• Clogged condenser cause higher energy
consumption (drying cycle elongation) and
dryer damage.
• Do not use sharp objects to clean.
6

What to do if ...

Troubleshooting by yourself
1)
Problem
Dryer not connected to mains supply.
Dryer does not
work. Loading door opened.
The START PAUSE button not pressed.
Incorrect programme set.
Fluff filters clogged.
Heat exchanger clogged.
Unsatisfactory
Max. loading exceeded.
drying results.
Covered ventilation grill.
Residue inside the drum.
To little free space around the appliance
Loading door
Filters not locked in place.
does not close
Programme in-
Full water reservoir.
active
www.zanussi.com
7
Possible cause
Cleaning the drum
Caution! Do not use abrasives or steel
wool to clean the drum.
Lime in the water or cleaning agents may
form a barely visible lining on the inside of
the drum. The degree to which the laundry has
been dried is then no longer detected reliably.
The laundry is damper than expected when re-
moved from the appliance.
Use a standard domestic cleaner (e.g. vinegar-
based cleaner) to wipe down the inside of the
drum and drum ribs.
Clean control panel and housing
Caution! Do not use furniture cleaners or
aggressive cleaning agents to clean the
machine.
Use a damp cloth to wipe down the control
panel and housing.
Plug in at mains socket. Check fuse in fuse
box (domestic installation).
Close loading door
Press the START PAUSE button.
Set suitable programme.
Clean fluff filters.
Clean heat exchanger.
Respect max. loading volume.
Uncover ventilation grill in base area.
Clean the drum inside.
Ensure min. 5cm free space around the ap-
pliance
Install fine filter and/or snap course filter into
place.
Empty water reservoir
PAUSE button.
Remedy
2)
3)
3)
3)
, press START
11