Edimax ES-3208P Datasheet

200Mbps Full Duplex Transmission
Edimax ES-3208P is a high speed fast Ethernet sw Edimax ES 3208P is a high speed fast Ethernet sw
only complies with IEEE 802.3/802.3u 10/100Mbp
transmission.
The full duplex feature can double the
speed server or switch-to-switch connections. The m
.
200Mbps
Supports Wire-speed and Flow Control
The ES-3208P built-in non-blocking and store-an
full-wire speed connections. It accommodates w full wire speed connections It accommodates w
pressure for half-duplex mode which ensure reliab
ES-3208P to create a high-speeds network a
reliability.
Supports Auto-MDI/MDI-X and Auto Sensing
ES-3208P supports PnP (plug and play) installatio
ES-3208P with computers or Ethernet devices w
straight-through or cross-over Ethernet cable and t i ht th h
The switch will automatically detect the right cable
8 Port ts Fast Ethernet Switch
witch for home and small business ES-3208P not witch for home and small business. ES 3208P not
ps Ethernet standard but also supports full duplex
e network throughput on every port. It is used for high
maximum throughput of every port can reach up to
nd-forward architecture feature your network with
with flow control for full duplex mode and back with flow control for full duplex mode and back
ble data transfer and help to prevent data lost. Use
nd benefit from it's ultimate performance and
on and auto-MDI/MDI-X function. You can connect
without any configuration. You also can use either
Eth t bl d combine 10 and 100Mbps devices into ES-3208P. bi
e and speed for your device.
10 d 100Mb d i
ES-3208P v3.0
i t ES 3208P