WeiderPro Pro 4500 Manual
Uk manual
Hide thumbs
Also See for Pro 4500:
- Gebruikershandleiding (32 pages) ,
- Manuel de l'utilisateur (32 pages) ,
- Bedienungsanleitung (32 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Need help?
Do you have a question about the Pro 4500 and is the answer not in the manual?
Questions and answers
HOW TO REMOVE WEIGHTS FOR MOVING EQUIPMENT
The manual does not provide specific instructions for removing weights from the WeiderPro Pro 4500. However, to move the machine safely, follow these general steps:
1. Ensure Safety – Make sure the weight system is stable and not under tension.
2. Remove the Weight Pin – Take out the pin securing the weight stack.
3. Detach the Cables – If necessary, loosen or disconnect the cables to reduce tension.
4. Disassemble the Weight Stack – Carefully lift and remove individual weight plates, ensuring they are placed on a stable surface.
5. Secure Loose Parts – Keep bolts, pins, and other components organized for reassembly.
If the cables need adjusting after reassembly, tighten them as needed following the manual's guidance.
This answer is automatically generated
Hi, please can you tell me what weights the seperate stacks start at and go up to on this model please ?
The starting and maximum weights for the separate stacks on the WeiderPro Pro 4500 are:
- High Pulley: Starts at 25 lbs, maximum 212 lbs
- Butterfly Arm (each arm): Starts at 16 lbs, maximum 88 lbs
- Press Arm: Starts at 30 lbs, maximum 165 lbs
- Low Pulley: Starts at 42 lbs, maximum 233 lbs
- Leg Lever: Starts at 40 lbs, maximum 212 lbs
This answer is automatically generated