Download Print this page

Advertisement

Quick Links

Advertisement

loading

Summary of Contents for Whirlpool Electric

  • Page 5 All messages relevant to safety specify the potential risk to which they refer and indicate how to reduce the risk of injury, damage and electric shocks due to incorrect use of the appliance. Make sure to comply with the following: - The appliance must be disconnected from the power supply before carrying out any installation operation.
  • Page 6 The packing material is 100% recyclable and marked with the recycling symbol ( ). The various parts of the packing must not be dispersed in the environment, but disposed of in compliance with local regulations. This appliance is marked in conformity with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is correctly disposed of, the user can help prevent potentially negative consequences for the environment and the health of people.
  • Page 7 Ideal for rapidly increasing the temperature of food to fast boiling in the case of water or rapidly Fast heating heating cooking liquids Ideal for browning, starting to cook, frying frozen products, fast boiling Frying - boiling Browning - slow frying - Ideal for slow frying, maintaining a high boil, cooking and grilling (short duration, 5-10 minutes) boiling - grilling Ideal for slow frying, maintaining a low boil, cooking and grilling (medium duration, 10-20 minutes),...
  • Page 8 For the electrical connection of the power cord is present in the supply. Follow the instructions below. Connect the ground cable yellow / green to terminal symbol 1. Remove the terminal cover (A) by unscrewing the screw and insert the cover into the hinge (B) of the terminal. 2.
  • Page 9 On/Off Quick access Control panel lock Slider Power Management/ Timer/Lock function button Cooking zone controls and corresponding display On/Off Timer Control panel lock Power Management/ Ecobooster/Automatic/Lock function button Cooking zone controls and corresponding display To switch the hob on, press the button for approx.
  • Page 10 The timer can be used to set the cooking time for a maximum of 99 minutes (1 hour and 39 minutes) for all the cooking zones. Select the cooking zone to be used with the timer, press the timer (see figure) and a beep signals the function. The display shows “00” and the LED indication comes on.
  • Page 11 After switching the hob on, press and hold the “+” button and the outermost button on the right simultaneously for at least three seconds (“control panel lock”). IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass. •...
  • Page 12 1. See if you can solve the problem yourself with the help of the “Troubleshooting guide”. 2. Switch the appliance off and then on again it to see if the problem has been eliminated. Always specify: • a brief description of the fault; •...