Power Cable Connection Diagram - Pioneer DEX-P99RS Installation Manual

Connecting the units

Power cable connection diagram

Connection method
Note:
• The position of the parking brake switch depends on the vehicle model. For details,

1. Clamp the lead.
consult the vehicle Owner's Manual or dealer.
The dome light
control lead
Antenna jack
Yellow/black (DOOR MUTE)
Connect to the lead which detects door opening.
Usually, connect to the dome light control lead.
Yellow/black (MUTE)
If you use an equipment with Mute function, wire this lead
to the Audio Mute lead on that equipment.
If not, keep the Audio Mute lead free of any connections.
Yellow (+ Battery)
Connect to the constant 12 V supply
terminal.
Red (ACC)
Connect to terminal controlled by
ignition switch (12 V DC).
Orange/white (ILL)
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
15 cm
2. Clamp firmly with
needle-nosed pliers.
Fuse (7.5A)
Fuse resistor
Fuse resistor