Clock And Timer; Power Outage - GE 10-95 CG Use And Care Manual

OVEN CONTROL, CLOCK AND TIMER
Clock
The clock must be set for the
automatic oven timing functions
to work properly. The time of day
cannot be changed during a Timed
Baking or a Self-Cleaning cycle.
Timer
The timer is a minute timer only.
The timer does not control
oven operations. The maximum
setting on the timer is 9 hours and
55 minutes.
To Reset the Timer
If "TIMER" is displayed, press the + or – pad
until the desired time is reached.
If "TIMER" is not displayed, press the TIMER
ON/OFF pad first, then follow the instructions above
to set the timer.

Power Outage

After a power outage, when power
is restored, the display will flash
and time shown will no longer be
correct—for example, after a 5-
minute power interruption the
clock will be 5 minutes slow.
All other functions that were in
operation when the power went out
will have to be programmed again.
To Set the Clock
1. Press the CLOCK pad.
CLOCK
To Set the Timer
1. Press the TIMER
TIMER
ON/OFF pad.
ON/OFF
2. Press the + or – pad to
set the amount of time
+
on timer.
–
To Cancel the Timer
Press the TIMER ON/OFF pad until the word
"TIMER" disappears from the display.
End of Cycle Tone
The end of cycle tone is a series
of 3 beeps followed by 1 beep
every 6 seconds. If you would like
to remove the signal that beeps
every 6 seconds, press and hold the
CLEAR/OFF pad for 10 seconds.
To return the signal that beeps
every 6 seconds, press and hold the
CLEAR/OFF pad for 10 seconds.
2. Press the + or – pad to
set the time of day.
+
–
3. Press the CLOCK pad to start.
The timer will start automatically
within a few seconds of releasing
the pad.
The timer, as you are setting it,
will display seconds until 1 minute
is reached.
Then it will display minutes
and seconds until 10 minutes
is reached.
After 10 minutes, it will display
hours ("HR" now appears in
display) and minutes until the
maximum time of 9 hours and
55 minutes is reached.
Display Messages
If "door" appears in the display,
the door latch handle is not moved
all the way to the right. Move the
latch handle and cleaning will
start. If "LOCK" appears in the
display, the oven door is in the
locked position. BAKE, BROIL
and COOK TIME cannot be set if
the door is in the locked position.
17