Upnp Settings; Ip Settings - AVM FRITZ!Box 6360 Cable Installation, Configuration And Operation

UPnP Settings

Starting the Computer – Wake On LAN
The detailed view for network devices that are connected with
the FRITZ!Box via a network (LAN) port includes the "Start
Computer" button. Use this button to start computers that
support Wake on LAN.
With the Wake on LAN function you can start computers in
your FRITZ!Box via the Internet. For instance, you can access a
computer at any time using remote maintenance software,
without wasting electricity by keeping the computer switched
on permanently.
3.2 UPnP Settings
The Universal Plug-and-Play (UPnP) service included in your
FRITZ!Box provides status information about the FRITZ!Box to
all connected computers. Programs with UPnP support on
these computers can receive this information and use them
to display the status of the FRITZ!Box (e.g., connection status,
data transmission). UPnP service thus allows you to monitor
your FRITZ!Box from a connected computer.
3.3

IP Settings

The IP settings of the FRITZ!Box are preset upon delivery with
the following values:
FRITZ!Box Factory Settings
IP address
Subnet mask
DHCP server
The IP address and the corresponding subnet mask yield the
following values:
Network address of the subnet 192.168.178.0
Entire IP address range for the
computers
192.168.178.1
255.255.255.0
enabled
192.168.178.2 -
192.168.178.253
124