Installing The Driver Software In Windows 2000 - AVM FRITZ! X USB Installation Manual

3.4 Installing the Driver Software in
Windows 2000
Administrator rights are required to install the driver
software in Windows 2000.
1. Once you have connected FRITZ!X USB to the computer
and ISDN, Windows 2000 Plug & Play recognizes the
PBX automatically. The Add New Hardware Wizard is
started.
2. Now you are prompted to specify a D-channel protocol.
"European ISDN (DSS1)" is already selected. Confirm
this selection by clicking "Next".
3. Choose your language and click "Continue".
4. If desired, enter your ISDN line's Multiple Subscriber
Numbers (MSN) in the "ISDN Multisubscriber Numbers"
window. Click "Next".
Remember that the MSNs configured here are valid
only for WAN connections, RAS and Internet access.
These settings have no effect on other software that
uses the CAPI 2.0 interface.
5. Conclude the installation by clicking "Finish".
This concludes the installation of the drivers delivered for
FRITZ!X USB in Windows 2000. FRITZ!X USB is now ready for
immediate operation. After installation the CAPI 2.0 and the
AVM ISDN NDIS WAN CAPI Driver are available on your
system.
To make sure that the latest version of these drivers is
installed, it may be necessary to update the drivers with the
installation program included on the FRITZ!X USB installation
CD:
1. Insert the FRITZ!X USB CD and run the program
SETUP.EXE in the WINDOWS.2K folder.
The installation program for FRITZ!X USB starts.
2. Choose your language and click "Continue".
3. In its sign-on window, click "Continue".

Installing the Driver Software in Windows 2000

FRITZ!X USB – 3 Software Installation 25