NETGEAR Nighthawk R7000 User Manual
  1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Wireless Router
  5. NIGHTHAWK R7000
  6. User manual

NETGEAR Nighthawk R7000 User Manual

Ac1900 smart wifi router
Hide thumbs Also See for Nighthawk R7000:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installation Manual
Nighthawk
AC1900 Smart WiFi Router
Model R7000
Us er Manual
November 2013
202-11301-03
350 East Plumeria Drive
San Jose, CA 95134
USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Nighthawk R7000 and is the answer not in the manual?

Questions and answers

sue
March 28, 2025

can't sign in to router NH7000 anymore to access devices

0
1 comments:
Mr. Anderson
March 28, 2025

To resolve sign-in issues with the NETGEAR Nighthawk R7000 router:

1. Connect to the Router: Use a wired connection by plugging your device into one of the LAN ports, or connect via Wi-Fi using a device with a browser.

2. Access the Login Page: Open a browser and go to http://www.routerlogin.net.

3. Reconnect if Disconnected: If the IP address of the router changes or you are disconnected, close and restart your browser and try accessing the login page again.

4. Ensure Proper Setup: Turn off the wireless radio on any other router or gateway if you're using the R7000 for wireless client access only.

Following these steps should help you sign in and access connected devices.

This answer is automatically generated

0

Related Manuals for NETGEAR Nighthawk R7000

Summary of Contents for NETGEAR Nighthawk R7000

  • Page 1 Nighthawk AC1900 Smart WiFi Router Model R7000 Us er Manual November 2013 202-11301-03 350 East Plumeria Drive San Jose, CA 95134...
  • Page 2 Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.

  • Page 3: Table Of Contents

    Change the Language ........18 Access the Router with NETGEAR genie Apps ..... 19 Chapter 3 Specify Your Internet Settings Use the Internet Setup Wizard .
  • Page 4 Nighthawk AC1900 Smart WiFi Router Model R7000 Optimize Internet Gaming with Upstream QoS ..... 39 Add Upstream QoS Rules ........40 Set Up QoS for Applications and Online Gaming.
  • Page 5 Use the Scan Feature of a Multifunction USB Printer ....92 Change NETGEAR USB Control Center Settings ....93 Chapter 10 Specify Network Settings View WAN Settings .
  • Page 6 Nighthawk AC1900 Smart WiFi Router Model R7000 Change the admin Password ........122 Recover the admin Password .
  • Page 7 Nighthawk AC1900 Smart WiFi Router Model R7000 Power LED Stays Amber ........157 LEDs Never Turn Off .

  • Page 8: Chapter 1 Hardware Setup

    NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future standards. 802.11ac 1300 Mbps is approximately 3x faster than 802.11n 450 Mbps.

  • Page 9: Unpack Your Router

    Align the antennas with the antenna posts on the router. Attach the antennas on the threaded antenna posts. Position the antennas for the best WiFi performance. NETGEAR recommends that the center antenna be vertical and that you aim the others outward at 45 degree angles, as shown.

  • Page 10: Top And Front Panels

    Nighthawk AC1900 Smart WiFi Router Model R7000 Top and Front Panels The router has status LEDs on top and a USB 3.0 port on the front. USB 3.0 port Figure 2. Router top and front view Table 1. LED and button descriptions...

  • Page 11: Rear Panel

    Nighthawk AC1900 Smart WiFi Router Model R7000 Table 1. LED and button descriptions (Continued) Description Ethernet ports The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100 Mbps or 10 Mbps Ethernet connections. • Solid. A powered-on device is connected to the Ethernet port.

  • Page 12: Position Your Router

    Nighthawk AC1900 Smart WiFi Router Model R7000 Position Your Router The router lets you access your network anywhere within the operating range of your wireless network. However, the operating distance or range of your wireless connection can vary significantly depending on the physical placement of your router. For example, the thickness and number of walls the wireless signal passes through can limit the range.

  • Page 13: Cable Your Router

    Nighthawk AC1900 Smart WiFi Router Model R7000 Cable Your Router The following image shows how to cable your router: Figure 4. Router cabling  To cable your router: Unplug your modem’s power, leaving the modem connected to the wall jack for your Internet service.

  • Page 14: Chapter 2 Connect To The Network And Access The Router

    Connect to the Network and Access the Router This chapter contains the following sections: • Connect to the Network • Types of Logins • Use an Internet Browser to Access the Router • Change the Language • Access the Router with NETGEAR genie Apps...

  • Page 15: Connect To The Network

    Nighthawk AC1900 Smart WiFi Router Model R7000 Connect to the Network You can connect to the router’s network through a wired or WiFi connection. If you set up your computer to use a static IP address, change the settings so that it uses Dynamic Host Configuration Protocol (DHCP).

  • Page 16: Label

    Internet service. NETGEAR genie Automatic Internet Setup You can set up your router with the NETGEAR genie automatically, or you can use the genie menus and screens to set up your router manually. Before you start the setup process, get your ISP information and make sure that the computers and devices in the network have the settings described here.
  • Page 17 ISP login program on your computer to access the Internet. When you start an Internet application, your router automatically logs you in. NETGEAR genie runs on any device with a web browser. Installation and basic setup takes about 15 minutes to complete. ...

  • Page 18: Log In To The Router

    NETGEAR technical support. Log In to the Router When you first set up your router, NETGEAR genie automatically starts when you launch an Internet browser on a computer that is connected to the router. If you want to view or change settings for the router, you can use genie again.

  • Page 19: Access The Router With Netgear Genie Apps

    Nighthawk AC1900 Smart WiFi Router Model R7000 Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. In the upper right corner, select a language from the drop-down list.

  • Page 20: Chapter 3 Specify Your Internet Settings

    Specify Your Internet Settings Usually, the quickest way to set up the router to use your Internet connection is to allow the genie to detect the Internet connection when you first access the router with an Internet browser. You can also customize or specify your Internet settings. This chapter contains the following sections: •...

  • Page 21: Use The Internet Setup Wizard

    Nighthawk AC1900 Smart WiFi Router Model R7000 Use the Internet Setup Wizard You can use the Setup Wizard to detect your Internet settings and automatically set up your router. The Setup Wizard is not the same as the genie screens that display the first time you connect to your router to set it up.

  • Page 22: Manually Set Up The Internet Connection

    Nighthawk AC1900 Smart WiFi Router Model R7000 Manually Set Up the Internet Connection You can view or change the router’s Internet connection settings. Specify an Internet Connection Without a Login  To specify the Internet connection settings: Launch an Internet browser from a computer or wireless device that is connected to the network.

  • Page 23: Specify An Internet Connection That Uses A Login

    Use This MAC Address. Enter the MAC address that you want to use. Click the Apply button. Your settings are saved. Click the Test button to test your Internet connection. If the NETGEAR website does not display within one minute, see Chapter 14, Troubleshooting. Specify an Internet Connection That Uses a Login ...
  • Page 24 Nighthawk AC1900 Smart WiFi Router Model R7000 Select Internet. Scroll to view more settings In the Does your Internet connection require a login section of the screen, select the Yes radio button. The screen adjusts. In the Internet Service Provider list, select the encapsulation method PPPoE, PPPoA, or L2TP.

  • Page 25: Specify Ipv6 Internet Connections

    Use This MAC Address. Enter the MAC address that you want to use. Click the Apply button. Your settings are saved. Click the Test button to test your Internet connection. If the NETGEAR website does not display within one minute, see Chapter 14, Troubleshooting. Specify IPv6 Internet Connections You can set up an IPv6 Internet connection if genie does not detect it automatically.

  • Page 26: Requirements For Entering Ipv6 Addresses

    Nighthawk AC1900 Smart WiFi Router Model R7000 • If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, select Auto Config. For more information about IPv6 Internet connection, see the following sections. Click the Apply button.

  • Page 27: Ipv6 Auto Config

    Nighthawk AC1900 Smart WiFi Router Model R7000 The screen adjusts: The router automatically detects the information in the following fields: • Connection Type. This field indicates the connection type that is detected. • Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the router’s WAN (or Internet) interface.
  • Page 28 Nighthawk AC1900 Smart WiFi Router Model R7000 The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Select ADVANCED > Advanced Setup > IPv6. The IPv6 screen displays.

  • Page 29: Ipv6 6To4 Tunnel

    Nighthawk AC1900 Smart WiFi Router Model R7000 • Use DHCP Server. This method passes more information to LAN devices, but some IPv6 systems might not support the DHCv6 client function. • Auto Config. This is the default setting. (Optional) Select the Use This Interface ID check box and specify the interface ID that you want to be used for the IPv6 address of the router’s LAN interface.

  • Page 30: Ipv6 Pass Through

    Nighthawk AC1900 Smart WiFi Router Model R7000 The router automatically detects the information in the Router’s IPv6 Address on LAN field. This field shows the IPv6 address that is acquired for the router’s LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address.

  • Page 31: Ipv6 Fixed

    Nighthawk AC1900 Smart WiFi Router Model R7000 The screen adjusts, but no additional fields display. Click the Apply button. IPv6 Fixed  To set up a fixed IPv6 Internet connection: Launch an Internet browser from a computer or wireless device that is connected to the network.

  • Page 32: Ipv6 Dhcp

    Nighthawk AC1900 Smart WiFi Router Model R7000 • Secondary DNS Server. The secondary DNS server that resolves IPv6 domain name records for the router. Note: If you do not specify the DNS servers, the router uses the DNS servers that are configured for the IPv4 Internet connection on the Internet Setup screen.
  • Page 33 Nighthawk AC1900 Smart WiFi Router Model R7000 The screen adjusts: The router automatically detects the information in the following fields: • Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the router’s WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address.

  • Page 34: Ipv6 Pppoe

    Nighthawk AC1900 Smart WiFi Router Model R7000 IPv6 PPPoE  To set up a PPPoE IPv6 Internet connection: Launch an Internet browser from a computer or wireless device that is connected to the network. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

  • Page 35: Change The Mtu Size

    “fragmented” to accommodate the device with the smallest MTU. The best MTU setting for NETGEAR equipment is often the default value. In some situations, changing the value fixes one problem but causes another. Leave the MTU unchanged unless one of these situations occurs: •...
  • Page 36 Nighthawk AC1900 Smart WiFi Router Model R7000 America Online’s DSL service • You use VPN and have severe performance problems. • You used a program to optimize MTU for performance reasons, and now you have connectivity or performance problems. Note: An incorrect MTU setting can cause Internet communication problems.
  • Page 37 Table 2. Common MTU sizes Application 1500 The largest Ethernet packet size. This setting is typical for connections that do not use PPPoE or VPN, and is the default value for NETGEAR routers, adapters, and switches. 1492 Used in PPPoE environments. 1472 Maximum size to use for pinging.

  • Page 38: Chapter 4 Optimize Performance

    Optimize Performance This chapter contains the following sections: • Prioritize Internet Traffic with Quality of Service • Optimize Internet Gaming with Upstream QoS • Add Upstream QoS Rules • Optimize Video Streaming with Downstream QoS • Improve Network Connections with Universal Plug and Play •...

  • Page 39: Prioritize Internet Traffic With Quality Of Service

    Figure 7. Upstream QoS assigns high priority to gaming traffic from your Xbox NETGEAR recommends that only gamers enable the Upstream QoS feature. If you do not game and you turn on this feature, some applications might not perform as well as usual.

  • Page 40: Add Upstream Qos Rules

    Nighthawk AC1900 Smart WiFi Router Model R7000  To enable upstream QoS: Launch an Internet browser from a computer or wireless device that is connected to the network. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. Enter the router user name and password.

  • Page 41: Set Up Qos For Applications And Online Gaming

    Nighthawk AC1900 Smart WiFi Router Model R7000 To specify prioritization of traffic, create a policy for the type of traffic and add the policy to the QoS Policy table in the QoS Setup screen. For convenience, the QoS Policy table lists many common applications and online games that can benefit from QoS handling.

  • Page 42: Set Up Qos For A Router Lan Port

    Nighthawk AC1900 Smart WiFi Router Model R7000 To add a priority rule, scroll down to the bottom of the QoS Setup screen and click the Add Priority Rule button. In the QoS Policy for field, type the name of the application or game.

  • Page 43: Set Up Qos For A Mac Address

    Nighthawk AC1900 Smart WiFi Router Model R7000 The QoS Priority Rule list displays. Scroll down and click the Add Priority Rule button. The QoS - Priority Rules screen displays. From the Priority Category list, select Ethernet LAN Port. From the QoS Policy for list, select the LAN port.

  • Page 44: Edit An Upstream Qos Policy

    Nighthawk AC1900 Smart WiFi Router Model R7000 From the Priority Category list, select MAC Address. If the device is in the MAC Device List, select its radio button. The information from the MAC Device List populates the policy name, MAC Address, and Device Name fields.

  • Page 45: Delete An Upstream Qos Policy

    Nighthawk AC1900 Smart WiFi Router Model R7000 Your changes are saved. Delete an Upstream QoS Policy  To delete a QoS policy: Launch an Internet browser from a computer or wireless device that is connected to the network. Type http://www.routerlogin.net or http://www.routerlogin.com.
  • Page 46 Nighthawk AC1900 Smart WiFi Router Model R7000 NETGEAR recommends that you enable downstream QoS only if you watch streaming Internet video. When downstream QoS assigns a high priority to streaming video, it also assigns lower priority to the rest of your Internet traffic. That means other tasks like downloading content from the Internet take longer.

  • Page 47: Add Downstream Qos Rules By Keyword

    Nighthawk AC1900 Smart WiFi Router Model R7000 Add Downstream QoS Rules by Keyword  To add a downstream QoS rule by keyword: Launch an Internet browser from a computer or wireless device that is connected to the network. Type http://www.routerlogin.net or http://www.routerlogin.com.

  • Page 48: Improve Network Connections With Universal Plug And Play

    Nighthawk AC1900 Smart WiFi Router Model R7000 The router assigns high priority to streaming traffic that goes from the Internet to the device you specified. Improve Network Connections with Universal Plug and Play Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access the network and connect to other devices as needed.

  • Page 49: Wi-Fi Multimedia Quality Of Service

    Nighthawk AC1900 Smart WiFi Router Model R7000 be fine for most home networks. If you notice that some devices are not being updated or reached correctly, it might be necessary to increase this value. Click the Apply button. The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the router and which ports (internal and external) that device has opened.

  • Page 50: Chapter 5 Control Access To The Internet

    Control Access to the Internet The router comes with a built-in firewall that helps protect your home network from unwanted intrusions from the Internet. This chapter includes the following sections: • Set Up Parental Controls • Block Access to Your Network •...

  • Page 51: Set Up Parental Controls

    The BASIC Home screen displays. Select Parental Controls. Click either the Windows Users or Mac Users button. Follow the onscreen instructions to download and install the NETGEAR Live Parental Controls management utility. Control Access to the Internet...
  • Page 52 Nighthawk AC1900 Smart WiFi Router Model R7000 After installation, Live Parental Controls automatically starts. Click the Next button. Read the note, and click the Next button again to proceed. Because Live Parental Controls uses free OpenDNS accounts, you are prompted to log in or create a free account.

  • Page 53: Block Access To Your Network

    Nighthawk AC1900 Smart WiFi Router Model R7000 Complete the fields and click the Next button. After you log on or create your account, the filtering level screen displays: Select a radio button for a filtering level and click the Next button.

  • Page 54: Use Keywords To Block Internet Sites

    Allow all new devices to connect. With this setting, if you buy a new device, it can access your network. You don’t need to enter its MAC address in this screen. NETGEAR recommends that you leave this radio button selected. •...
  • Page 55 Nighthawk AC1900 Smart WiFi Router Model R7000 Select ADVANCED > Security > Block Sites. Select one of the keyword blocking options: • Per Schedule. Turn on keyword blocking according to the Schedule screen settings. (See Schedule When to Block Internet Sites and Services on page 57.)

  • Page 56: Block Services From The Internet

    Nighthawk AC1900 Smart WiFi Router Model R7000 Block Services from the Internet You can block Internet services on your network based on the type of service. You can block the services all the time or based on a schedule. ...

  • Page 57: Schedule When To Block Internet Sites And Services

    Nighthawk AC1900 Smart WiFi Router Model R7000 • To find out which port numbers the service or application uses, you can contact the publisher of the application, ask user groups or newsgroups, or search on the Internet. To specify how to filter the services, select one of the following radio buttons: •...

  • Page 58: Avoid Blocking On A Trusted Computer

    Nighthawk AC1900 Smart WiFi Router Model R7000 Avoid Blocking on a Trusted Computer You can exempt one trusted computer from blocking. The computer you exempt must have a fixed IP address. You can use the reserved IP address feature to specify the IP address. See...
  • Page 59 Nighthawk AC1900 Smart WiFi Router Model R7000 Select ADVANCED > Security > E-mail. Select the Turn Email Notification On check box. In the Your Outgoing Mail Server field, enter the name of your ISP outgoing (SMTP) mail server (such as mail.myISP.com).

  • Page 60: Chapter 6 Share Usb Drives Attached To The Router

    Use FTP Within the Network • Add a Network Folder on a USB Drive • Edit a Network Folder on a USB Drive • Approve USB Devices • Safely Remove a USB Drive For more information about ReadySHARE features, visit www.netgear.com/readyshare.

  • Page 61: Usb Drive Requirements

    Nighthawk AC1900 Smart WiFi Router Model R7000 USB Drive Requirements The router works with most USB-compliant external flash and hard drives. For the most up-to-date list of USB drives that the router supports, visit http://kbserver.netgear.com/readyshare. Some USB external hard drives and flash drives require you to load the drivers onto the computer before the computer can access the USB device.
  • Page 62 Nighthawk AC1900 Smart WiFi Router Model R7000 If your USB drive has a power supply, you must use it when you connect the USB drive to the router. When you connect the USB drive to the router USB port, it might take up to two minutes before it is ready for sharing.

  • Page 63: Back Up Windows Computers With Readyshare Vault

    Set Up a USB Hard Drive on a Mac NETGEAR recommends that you use a new USB HDD or format your old USB disk to do the Time Machine backup for the first time. Use a blank partition to prevent some issues during backup using Time Machine.

  • Page 64: Prepare To Back Up A Large Amount Of Data

    Click the OK button. Click the Apply button. Prepare to Back Up a Large Amount of Data Before you back up a large amount of data with Time Machine, NETGEAR recommends that you follow this procedure.  To prepare to back up a large amount of data: Upgrade the operating system of the Mac computer.

  • Page 65: Control Access To The Usb Drive

    Nighthawk AC1900 Smart WiFi Router Model R7000 When you connect the USB drive to the router USB port, it might take up to two minutes before it is ready for sharing. By default, the USB drive is available to all computers on your local area network (LAN).
  • Page 66 Nighthawk AC1900 Smart WiFi Router Model R7000 Select ADVANCED > USB Storage > Advanced Settings. Specify access to the USB storage device: • Network Device Name. This is the name used to access the USB device connected to the router. The default is readyshare.

  • Page 67: Use Ftp Within The Network

    Nighthawk AC1900 Smart WiFi Router Model R7000 Use FTP Within the Network File Transfer Protocol (FTP) lets you send and receive large files faster.  To set up FTP access: Launch an Internet browser from a computer or wireless device that is connected to the network.
  • Page 68 Nighthawk AC1900 Smart WiFi Router Model R7000 A login screen displays. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays.

  • Page 69: Add A Network Folder On A Usb Drive

    Nighthawk AC1900 Smart WiFi Router Model R7000 Add a Network Folder on a USB Drive You can add network folders on the USB storage device.  To add a network folder: Launch an Internet browser from a computer or wireless device that is connected to the network.

  • Page 70: Edit A Network Folder On A Usb Drive

    Nighthawk AC1900 Smart WiFi Router Model R7000 Edit a Network Folder on a USB Drive You can add network folders on the USB storage device.  To edit a network folder: Launch an Internet browser from a computer or wireless device that is connected to the network.

  • Page 71: Safely Remove A Usb Drive

    Nighthawk AC1900 Smart WiFi Router Model R7000 Select ADVANCED > Advanced Setup > USB Settings. By default the Enable any USB Device connection to the USB port radio button is selected. This setting lets you connect and access all your USB drives.
  • Page 72 Nighthawk AC1900 Smart WiFi Router Model R7000 Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Select USB Storage > Basic Settings.

  • Page 73: Chapter 7 Access The Router's Usb Drive Through The Internet

    Access the Router’s USB Drive Through the Internet With Dynamic DNS, you can use the Internet to access a USB hard drive attached to the router’s USB port router when you’re not home. This chapter includes the following sections: • Access the USB Drive Through the Internet •...

  • Page 74: Access The Usb Drive Through The Internet

    Nighthawk AC1900 Smart WiFi Router Model R7000 Access the USB Drive Through the Internet You can access the USB drive through the Internet when you’re not home.  To access the USB drive from a remote computer: Launch a web browser on a computer that is not on your home network.

  • Page 75: Access The Usb Drive Through The Internet With Ftp

    Nighthawk AC1900 Smart WiFi Router Model R7000 Select ADVANCED > USB Storage > Advanced Settings. Select the FTP (via Internet) check box. Click the Apply button. Your changes are saved. To limit access to the admin user, click the Edit button.

  • Page 76: Dynamic Dns

    Nighthawk AC1900 Smart WiFi Router Model R7000 Type ftp:// and the Internet port IP address in the address field of the browser. For example, type ftp://10.1.65.4. If you are using Dynamic DNS, type the DNS name. For example, type ftp://MyName.mynetgear.com.

  • Page 77: Set Up A New Dynamic Dns Account

    Nighthawk AC1900 Smart WiFi Router Model R7000 NETGEAR Dynamic DNS (DDNS) service account and specify the account settings in the router’s Dynamic DNS screen. FTP Directory: FTP://‘custom name’.mynetgear.com FTP Directory: FTP://‘custom name’.mynetgear.com FTP Directory: FTP://‘custom name’.mynetgear.com Direc tory: FTP: //‘cus name ’.myn...

  • Page 78: Specify A Dns Account That You Already Have

    A message displays the Dynamic DNS status. Specify a DNS Account That You Already Have If you already have a Dynamic DNS account with NETGEAR no-ip, www.no-ip.com, or www.DynDNS.org, you can set up the router to use your account. ...
  • Page 79 For a www.no-ip or www.DynDNS account, in the User Name field, enter the user name for your account. For a NETGEAR account at www.no-ip, in the Email field, type the email address for your account. In the Password (6-32 characters) field, type the password for your DDNS account.

  • Page 80: Change The Dynamic Dns Settings

    Nighthawk AC1900 Smart WiFi Router Model R7000 Change the Dynamic DNS Settings  To change your settings: Launch an Internet browser from a computer or wireless device that is connected to the network. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

  • Page 81: Chapter 8 Use The Router As A Media Server

    Use the Router as a Media Server This chapter contains the following sections: • Specify ReadyDLNA Media Server Settings • Play Music from a USB Drive with iTunes Server • Play Media from a USB Drive on TiVo...

  • Page 82: Specify Readydlna Media Server Settings

    Nighthawk AC1900 Smart WiFi Router Model R7000 Specify ReadyDLNA Media Server Settings By default, the router acts as a ReadyDLNA media server, which lets you view movies and photos on DLNA/UPnP AV-compliant media players, such as Xbox360, Playstation, and NETGEAR media players.
  • Page 83 Nighthawk AC1900 Smart WiFi Router Model R7000 iPhone or iPad to play music on any AirPlay devices, such as Apple TV or AirPlay-supported receivers. Figure 11. Play music on a USB drive with iTunes Supported music file formats are MP3, AAC, FLAC, The maximum number of music file supported is10,000 WAV and WMA3 ...

  • Page 84: Play Media From A Usb Drive On Tivo

    Nighthawk AC1900 Smart WiFi Router Model R7000 d. Select ADVANCED > USB Storage > Media Server. e. Make sure that the Enable iTunes Media Server (Music Only) check box is selected. f. Enter the passcode and click the Allow Control button.
  • Page 85  To play videos: On the TiVo, select TiVo Central > My Shows. Go to the bottom of the list tand select the R7000.  To play music or view photos: On the TiVo, select TiVo Central > Music, Photos, & Showcases.
  • Page 86 Nighthawk AC1900 Smart WiFi Router Model R7000 Select an item to play or watch.  To copy TiVo files to a computer: Use the TiVo Desktop accessory, available at https://www3.tivo.com/store/accessories-software.do. Use the Router as a Media Server...

  • Page 87: Chapter 9 Share A Usb Printer

    Download the ReadySHARE Printer Utility • Install the ReadySHARE Printer Utility • Use the Shared Printer • View or Change the Status of a Printer • Use the Scan Feature of a Multifunction USB Printer • Change NETGEAR USB Control Center Settings...

  • Page 88: Install The Printer Driver And Cable The Printer

    Nighthawk AC1900 Smart WiFi Router Model R7000 Install the Printer Driver and Cable the Printer Some USB printer manufacturers (for example, HP and Lexmark printers) request that you do not connect the USB cable until the installation software prompts you to do so.

  • Page 89: Install The Readyshare Printer Utility

    Install the ReadySHARE Printer Utility You must install the ReadySHARE Printer utility on each computer that will share the printer. After you install it, the utility displays as NETGEAR USB Control Center on your computer.  To install the utility: Double-click the ReadySHARE Printer utility setup file that you downloaded.

  • Page 90: Use The Shared Printer

    Nighthawk AC1900 Smart WiFi Router Model R7000 The NETGEAR USB Control Center displays the main screen. Some firewall software, such as Comodo, blocks NETGEAR USB Control Center from accessing the USB printer. If you do not see the USB printer displayed in the screen, you can disable the firewall temporarily to allow the utility to work.

  • Page 91: View Or Change The Status Of A Printer

    If another computer is already connected to the printer, your print job goes into a queue to wait to be printed. If your document does not print, use the NETGEAR USB Control Center to check the status. View or Change the Status of a Printer ...

  • Page 92: Use The Scan Feature Of A Multifunction Usb Printer

    Nighthawk AC1900 Smart WiFi Router Model R7000 Use the Scan Feature of a Multifunction USB Printer If your USB printer supports scanning, you can also use the USB printer for scanning. For example, the USB printer displayed in the Windows Printers and Faxes window is ready for print jobs.

  • Page 93: Change Netgear Usb Control Center Settings

    Nighthawk AC1900 Smart WiFi Router Model R7000 Change NETGEAR USB Control Center Settings You can stop the NETGEAR USB Control Center from starting automatically when you log in to Windows. You can also change the language and specify the time-out to release the printer connection.

  • Page 94: Chapter 10 Specify Network Settings

    Specify Network Settings This chapter includes the following sections: • View WAN Settings • Set Up a Default DMZ Server • Change the Router’s Device Name • Change the LAN TCP/IP Settings • Specify the IP Addresses that the Router Assigns •...

  • Page 95: View Wan Settings

    Nighthawk AC1900 Smart WiFi Router Model R7000 View WAN Settings You can view or configure wide area network (WAN) settings for the Internet port. You can set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the router to respond to a ping to its WAN (Internet) port.

  • Page 96: Set Up A Default Dmz Server

    Nighthawk AC1900 Smart WiFi Router Model R7000 MTU only if you are sure that it is necessary for your ISP connection. See Change the MTU Size on page 35. • NAT Filtering. Network Address Translation (NAT) determines how the router processes inbound traffic.

  • Page 97: Change The Router's Device Name

    Type the IP address. Click the Apply button. Your change takes effect. Change the Router’s Device Name The router’s device name is R7000. This device name displays in file manager when you browse your network.  To change the router’s device name: Launch an Internet browser from a computer or wireless device that is connected to the network.
  • Page 98 Nighthawk AC1900 Smart WiFi Router Model R7000  To change the LAN TCP/IP settings: Launch an Internet browser from a computer or wireless device that is connected to the network. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. Enter the router user name and password.

  • Page 99: Specify The Ip Addresses That The Router Assigns

    Nighthawk AC1900 Smart WiFi Router Model R7000 RIP-1. This format is universally supported. It is adequate for most networks, unless you have an unusual network setup. RIP-2. This format carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses multicasting.

  • Page 100: Disable The Dhcp Server Feature In The Router

    Nighthawk AC1900 Smart WiFi Router Model R7000 Select ADVANCED > Setup > LAN Setup. Make sure that the Use Router as DHCP Server check box is selected. Specify the range of IP addresses that the router assigns: a. In the Starting IP Address field, type the lowest number in the range.

  • Page 101: Reserve Lan Ip Addresses

    Nighthawk AC1900 Smart WiFi Router Model R7000  To disable the DHCP server feature in the router: Launch an Internet browser from a computer or wireless device that is connected to the network. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

  • Page 102: Use The Wps Wizard For Wifi Connections

    Nighthawk AC1900 Smart WiFi Router Model R7000 Click the Apply button. The reserved address is entered into the table. The reserved address is not assigned until the next time the computer contacts the router’s DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release and renew.

  • Page 103: Specify Basic Wifi Settings

    Note: The preset SSID and password are uniquely generated for every device to protect and maximize your wireless security. NETGEAR recommends that you do not change your preset security settings. If you change your preset security settings, make a note of the new settings and store it in a safe place where you can easily find it.
  • Page 104 Nighthawk AC1900 Smart WiFi Router Model R7000 Select Wireless. In the Region list, select your region. In some locations, you cannot change this setting. To control the SSID broadcast, select or clear the Enable SSID Broadcast check box. When this check box is selected, the router broadcasts its network name (SSID) so that it displays when you scan for local WiFi networks on your computer or wireless device.

  • Page 105: Change The Wifi Security Option

    Your router comes with preset WPA2 or WPA security. The password that you enter to connect to your network is unique to your router and is on the router label. NETGEAR recommends that you use the preset security, but you can change them. NETGEAR recommends that you do not disable security.

  • Page 106: Set Up A Guest Network

    Nighthawk AC1900 Smart WiFi Router Model R7000 The WPA2 options use the newest standard for the strongest security, but some older computers and wireless devices cannot use WPA2. By default, the WPA-PSK [TKIP] + WPA2-PSK [AES] radio button is selected so that new or old computers and wireless devices can connect to the WiFi network by using either WPA2 or WPA security.
  • Page 107 Select a radio button for a security option. The WPA2 options use the newest standard for the strongest security, but some older computers and wireless devices cannot use it. NETGEAR recommends that you select the WPA-PSK [TKIP] + WPA2-PSK [AES] radio button. This setting protects your WiFi network and lets computers and wireless devices can connect to the WiFi network by using either WPA2 or WPA security.

  • Page 108: How The Router Manages Wireless Clients

    Nighthawk AC1900 Smart WiFi Router Model R7000 How the Router Manages Wireless Clients A wireless client is any computer or wireless device that connects to the router’s WiFi network. The router uses Airtime fairness and implicit Beamforming to manage its wireless clients.

  • Page 109: Control The Wireless Radios

    Nighthawk AC1900 Smart WiFi Router Model R7000 The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Select ADVANCED > Advanced Setup > Wireless Settings. Scroll down below the WPS Settings section of the screen and clear the Enable Implicit BEAMFORMING check box.

  • Page 110: Set Up A Wireless Schedule

    Nighthawk AC1900 Smart WiFi Router Model R7000 The BASIC Home screen displays. Select ADVANCED > Advanced Setup > Wireless Settings. Select or clear the Enable Wireless Radio check boxes in the 2.4 GHz and 5 GHz sections of the screen.

  • Page 111: Specify Wps Settings

    Nighthawk AC1900 Smart WiFi Router Model R7000 Select ADVANCED > Advanced Setup > Wireless Settings. The Advanced Wireless Settings screen displays. Click the Add a new period button. Use the lists, radio buttons, and check boxes to set up a period during which you want to turn off the wireless signal.

  • Page 112: Use The Router As A Wireless Access Point

    (Optional) Select or clear the Keep Existing Wireless Settings check box. By default, the Keep Existing Wireless Settings check box is selected. NETGEAR recommends that you leave this check box selected. If you clear this check box, the next time a new wireless client uses WPS to connect to the router, the router wireless settings change to an automatically generated random SSID and security key.
  • Page 113 Note: To avoid interference with other routers or gateways in your network, NETGEAR recommends that you use different wireless settings on each router. You can also turn off the wireless radio on the other router or gateway and use the R7000 only for wireless client access.

  • Page 114: Set Up The Router In Bridge Mode

    Smart WiFi Router in bridge mode Smart WiFi Router Figure 12. Router in bridge mode with an 802.11ac WiFi connection Installing your R7000 as a bridge offers the following benefits: • Take advantage of gigabit WiFi speeds on current devices.
  • Page 115 Nighthawk AC1900 Smart WiFi Router Model R7000 Launch an Internet browser from a computer or wireless device that is connected to the network. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive.

  • Page 116: Set Up A Wireless Distribution System

    Nighthawk AC1900 Smart WiFi Router Model R7000 For 802.11ac mode, select 5 GHz. b. In the Name (SSID) field, enter the wireless network name (SSID). c. In the Security Option section, select a radio button. d. If prompted, type the passphrase (the WiFi password that you use to connect wirelessly to the other router).

  • Page 117: Set Up The Base Station

    Nighthawk AC1900 Smart WiFi Router Model R7000 • Wireless base station. The router acts as the parent access point that bridges traffic to and from the child repeater access point. The base station also handles wireless and wired local computers. To configure this mode, you must know the MAC addresses of the child repeater access point.

  • Page 118: Set Up A Repeater

    Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless connection to the base station. If you are using the router as the base station with a non-NETGEAR router as the repeater, you might need to change more configuration settings. In particular, disable the DHCP server function on the access point that is the repeater.
  • Page 119 Nighthawk AC1900 Smart WiFi Router Model R7000 Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays.
  • Page 120 Nighthawk AC1900 Smart WiFi Router Model R7000 Verify connectivity across the LANs. A computer on any wireless or wired LAN segment of the router can connect to the Internet or share files and printers with any other computer or server connected to the other access point.

  • Page 121: Chapter 11 Manage Your Network

    Manage Your Network This chapter describes the router settings for administering and maintaining your router and home network. This chapter includes the following sections: • Update the Router Firmware • Change the admin Password • Recover the admin Password • View Router Status •...

  • Page 122: Update The Router Firmware

    Nighthawk AC1900 Smart WiFi Router Model R7000 Update the Router Firmware The router firmware (routing software) is stored in flash memory. You might see a message at the top of the genie screens when new firmware is available. You can respond to that message to update the firmware, or you can check to see if new firmware is available, and to update your product.

  • Page 123: Recover The Admin Password

    Your changes take effect. Recover the admin Password NETGEAR recommends that you enable password recovery if you change the password for the router user name admin. Then you can recover the password if it is forgotten. This recovery process is supported in Internet Explorer, Firefox, and Chrome browsers, but not in the Safari browser.

  • Page 124: View Router Status

    Nighthawk AC1900 Smart WiFi Router Model R7000 Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Select ADVANCED > Administration > Set Password.

  • Page 125: Display Internet Port Statistics

    Nighthawk AC1900 Smart WiFi Router Model R7000 Click the ADVANCED tab. For information about the displayed settings, click the Show/Hide Help Center link at the bottom of the screen. Display Internet Port Statistics  To display Internet port statistics: Launch an Internet browser from a computer or wireless device that is connected to the network.

  • Page 126: Check The Internet Connection Status

    Nighthawk AC1900 Smart WiFi Router Model R7000 In the Internet Port pane, click the Show Statistics button. The following information displays: • System Up Time. The time elapsed since the router was last restarted. • Port. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the screen displays: Status.

  • Page 127: View Logs Of Router Activity

    Nighthawk AC1900 Smart WiFi Router Model R7000 The BASIC Home screen displays. Click the ADVANCED tab. In the Internet Port pane, click the Connection Status button. The following information displays: • IP Address. The IP address that is assigned to the router.

  • Page 128: Monitor Internet Traffic

    Nighthawk AC1900 Smart WiFi Router Model R7000 A login screen displays. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays.
  • Page 129 Nighthawk AC1900 Smart WiFi Router Model R7000 Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays.

  • Page 130: Create Custom Static Routes

    Nighthawk AC1900 Smart WiFi Router Model R7000 In the Traffic Control section, specify whether the router should issue a warning message before the monthly limit of Mbytes or hours is reached. By default, the value is 0 and no warning message is issued. You can select one of the following to occur when the limit is attained: •...
  • Page 131 Nighthawk AC1900 Smart WiFi Router Model R7000 Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays.

  • Page 132: View Devices Currently On The Network

    Nighthawk AC1900 Smart WiFi Router Model R7000  To delete a static route: In the table, select the radio button for the route. Click the Delete button. The route is removed from the table. View Devices Currently on the Network You can view all computers or devices that are currently connected to your network.

  • Page 133: Manage The Router Configuration File

    Nighthawk AC1900 Smart WiFi Router Model R7000 Manage the Router Configuration File The configuration settings of the router are stored within the router in a configuration file. You can back up (save) this file to your computer, restore it, or reset it to the factory default settings.

  • Page 134: Erase The Current Configuration Settings

    Nighthawk AC1900 Smart WiFi Router Model R7000 The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Select ADVANCED > Administration > Backup Settings. Click the Browse button to find and select the cfg file.
  • Page 135 Nighthawk AC1900 Smart WiFi Router Model R7000 Note: Be sure to change the password for the user name admin to a secure password. The ideal password contains no dictionary words from any language and contains uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters. See...
  • Page 136 Nighthawk AC1900 Smart WiFi Router Model R7000 • To allow access from a range of IP addresses on the Internet, select the IP Address Range radio button. Enter a beginning and ending IP address to define the allowed range. •...

  • Page 137: Chapter 12 Use Vpn To Access Your Network

    Use VPN to Access Your Network This chapter includes the following sections: • Set Up a VPN Connection • Specify VPN Service in the Router • Install OpenVPN Software on Your Computer • Use VPN to Access the Router’s USB Drive and Media •...

  • Page 138: Set Up A Vpn Connection

    Nighthawk AC1900 Smart WiFi Router Model R7000 Set Up a VPN Connection A virtual private network (VPN) lets you use the Internet to securely access your network when you aren’t home. Secure remote access Internet Open VPN Client Figure 14. VPN provides a secure tunnel between your home network and a remote computer This type of VPN access is called a client-to-gateway tunnel.

  • Page 139: Specify Vpn Service In The Router

    Select the Enable VPN Service check box. By default, the VPN uses the UDP service type and uses port 12974. If you want to customize the service type and port, NETGEAR recommends that you change these settings before you install the OpenVPN software.
  • Page 140 Nighthawk AC1900 Smart WiFi Router Model R7000 The OpenVPN Setup Wizard displays: Click the Next button. Read the License Agreement and click the I Agree button. The Choose Components screen displays: Leave the check boxes selected as shown, and click the Next button.

  • Page 141: Use A Vpn Tunnel

    VPN tunnel from your computer to your router over the Internet. For the VPN tunnel to work, the local LAN IP address of the remote R7000 must have a different LAN IP scheme than the local LAN where your VPN client computer is connected. If both networks use the same LAN IP scheme, when the VPN tunnel is established, you cannot access your home router or your home network with the OpenVPN software.
  • Page 142 Nighthawk AC1900 Smart WiFi Router Model R7000  To open a VPN tunnel: Launch the OpenVPN application with administrator privileges. The OpenVPN icon displays in the Windows taskbar. Tip: You can create a shortcut to the VPN program, then in the settings for the shortcut and select the run as administrator check box.

  • Page 143: Use Vpn To Access The Router's Usb Drive And Media

    The network resources display. The ReadySHARE icon is in the computers section and the remote R7000 icon is in the Media Devices section (if DLNA is enabled in the router). If the icons do not display, click the Refresh button to update the screen.

  • Page 144: Block Vpn Client Internet Access In The Router

    Nighthawk AC1900 Smart WiFi Router Model R7000 Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays.

  • Page 145: Use A Vpn Tunnel To Access Your Internet Service At Home

    Nighthawk AC1900 Smart WiFi Router Model R7000 Scroll down to the Clients will use this VPN connection to access section, and select the Home Network only radio button. This is the default setting. The VPN connection is only to your home network, not to the Internet service for your home network.

  • Page 146: Chapter 13 Specify Internet Port Settings

    Specify Internet Port Settings You can use port forwarding and port triggering to set up rules for Internet traffic. You need networking knowledge to set up these features. This chapter includes the following sections: • Set Up Port Forwarding to a Local Server •...

  • Page 147: Set Up Port Forwarding To A Local Server

    Nighthawk AC1900 Smart WiFi Router Model R7000 Set Up Port Forwarding to a Local Server If you have a server in your home network, you can allow certain types of incoming traffic to reach the server. For example, you might want to make a local web server, FTP server, or game server visible and available to the Internet.

  • Page 148: Add A Custom Port Forwarding Service

    Nighthawk AC1900 Smart WiFi Router Model R7000 Click the Add button. The service displays in the list. Add a Custom Port Forwarding Service  To add a custom service: Find out which port number or range of numbers the application uses.

  • Page 149: Edit A Port Forwarding Service

    Nighthawk AC1900 Smart WiFi Router Model R7000 • Type the port numbers in the Internal Starting Port and Internal Ending Port fields. Type the IP address in the Internal IP address field or select the radio button for an attached device listed in the table.

  • Page 150: Delete A Port Forwarding Entry

    Nighthawk AC1900 Smart WiFi Router Model R7000 Delete a Port Forwarding Entry  To delete a port forwarding entry: Launch an Internet browser from a computer or wireless device that is connected to the network. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

  • Page 151: Set Up Port Triggering

    Nighthawk AC1900 Smart WiFi Router Model R7000 • Destination address. The IP address of www.example.com, which is the address of your router. • Destination port number. 80, which is the standard port number for a web server process. Your router receives the message and finds your port forwarding rule for incoming port 80 traffic.

  • Page 152: Enable Port Triggering

    Nighthawk AC1900 Smart WiFi Router Model R7000 A login screen displays. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays.

  • Page 153: Application Example: Port Triggering For Internet Relay Chat

    Nighthawk AC1900 Smart WiFi Router Model R7000 A login screen displays. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays.
  • Page 154 Nighthawk AC1900 Smart WiFi Router Model R7000 Your IRC client composes a request message to an IRC server using a destination port number of 6667, the standard port number for an IRC server process. Your computer then sends this request message to your router.

  • Page 155: Chapter 14 Troubleshooting

    Troubleshooting This chapter provides information to help you diagnose and solve problems you might have with your router. If you do not find the solution here, check the NETGEAR support site at http://support.netgear.com for product and contact information. This chapter contains the following sections: •...

  • Page 156: Quick Tips

    Nighthawk AC1900 Smart WiFi Router Model R7000 Quick Tips This section describes tips for troubleshooting some common problems. Sequence to Restart Your Network When you need to restart your network, follow this sequence: Turn off and unplug the modem. Turn off the router.

  • Page 157: Troubleshoot With The Leds

    Make sure that the power adapter is securely connected to your router and securely connected to a working power outlet. • Check that you are using the power adapter that NETGEAR supplied for this product. • If the Power LED blinks slowly and continuously, the router firmware is corrupted. This can happen if a firmware upgrade is interrupted, or if the router detects a problem with the firmware.

  • Page 158: Internet Or Ethernet Port Leds Are Off

    Nighthawk AC1900 Smart WiFi Router Model R7000 • Press and hold the Reset button to return the router to its factory settings. For more information, see Troubleshoot Your Network Using the Ping Utility on page 162. If the error persists, you might have a hardware problem. Contact technical support at www.netgear.com/support.

  • Page 159: Cannot Access The Internet

    Make sure that Caps Lock is off when you enter this information. • If you are attempting to set up your NETGEAR behind an existing router in your network, use bridge mode or set up the router as an access point. •...

  • Page 160: Troubleshoot Pppoe

    Nighthawk AC1900 Smart WiFi Router Model R7000 If your router has an IP address, but your computer is does not load any web pages from the Internet, it might be due to the following reasons: • Your computer might not recognize any DNS server addresses.

  • Page 161: Changes Not Saved

    Nighthawk AC1900 Smart WiFi Router Model R7000 Typically, your ISP provides the addresses of one or two DNS servers for your use. If you entered a DNS address during the router’s configuration, restart your computer. Alternatively, you can configure your computer manually with a DNS address, as explained in the documentation for your computer.

  • Page 162: Troubleshoot Your Network Using The Ping Utility

    Nighthawk AC1900 Smart WiFi Router Model R7000 • Is your router too far from your computer, or too close? Place your computer near the router, but at least 6 feet (1.8 meters) away, and see whether the signal strength improves.

  • Page 163: Test The Path From Your Computer To A Remote Device

    Nighthawk AC1900 Smart WiFi Router Model R7000 Verify that the IP address for your router and your computer are correct and that the addresses are on the same subnet. Test the Path from Your Computer to a Remote Device After verifying that the LAN path works correctly, test the path from your computer to a remote device.

  • Page 164: Appendix A Supplemental Information

    Supplemental Information This appendix covers the following topics: • Factory Settings • Technical Specifications...

  • Page 165: Factory Settings

    Nighthawk AC1900 Smart WiFi Router Model R7000 Factory Settings You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router for at least seven seconds. The router resets, and returns to the factory configuration settings shown in the following table.
  • Page 166 Nighthawk AC1900 Smart WiFi Router Model R7000 Table 3. Factory default settings (continued) Feature Default behavior Wireless Wireless communication Enabled SSID name See router label Security WPA2-PSK (AES) Broadcast SSID Enabled Transmission speed Auto Country/region United States in the US; otherwise varies by region...

  • Page 167: Technical Specifications

    Nighthawk AC1900 Smart WiFi Router Model R7000 Technical Specifications Table 4. R7000 Router specifications Feature Description Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and SMB Power adapter • North America: 120V, 60 Hz, input •...

This manual is also suitable for:

Nighthawk ac 1900 r7000

Table of Contents

Save PDF