Yamaha WR450F Owner's Manual page 76

PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
3
1. Do not touch the glass part of the bulb.
4
1. Remove the headlight cowling to-
gether with the headlight unit by
5
removing the bolts and pulling up-
ward as shown.
6
7
2
8
9
1. Headlight cowling
2. Bolt
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
2
1. Headlight coupler
2. Headlight bulb cover
3. Remove the headlight bulb holder
by turning it counterclockwise, and
1
then remove the burnt-out bulb.
2
1
1. Headlight bulb holder
1
6-33
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Install the bulb cover, and then
connect the coupler.
6. Install the headlight cowling (to-
gether with the headlight unit) by
placing it in the original position,
and then installing the bolts.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.