Hdmi Device - Toshiba AT1S0 User Manual

HDMI device

The tablet is equipped with an Micro HDMI port that can send video by
connecting with external devices. 720p, 576p and 480p signal formats are
supported, but actually available signal format depends on each HDMI
device.
To connect external devices, follow the steps as detailed below:
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors has not been confirmed, some HDMI monitors may not function
properly.
1. Plug Type D connector of the HDMI cable into the Micro HDMI port on
your tablet.
2. Plug the other end of the HDMI cable into the HDMI port of the HDMI
device.
1. Micro HDMI port
Please connect or disconnect an HDMI device to or from the tablet under
the following conditions:
■
The tablet is turned on.
■
The tablet is completely turned off.
Do not do so when the tablet is in Sleep Mode.
■
When you connect a television or external monitor to the HDMI port,
the display output device is set to HDMI.
■
When you unplug the HDMI cable and re-plug it, please wait at least 5
seconds before you re-plug the HDMI cable again.
User's Manual
(Sample Illustration) Connecting an HDMI cable
Optional Accessories
2. Micro HDMI (Type D) connector
65