HP Integrity Superdome 2 16-socket User Manual page 22

6. Be sure that all components are installed and cabled before continuing. Select Continue, and
press the OK button to begin verifying for configuration and installation errors. When Continue
is selected, the enclosure UID automatically turns off.
7. If no errors are detected, the rear enclosure UID turns off, and then the Insight Display screen
illuminates green. Press the OK button to return to the Main Menu. Enclosure and blade
hardware setup and configuration is complete.
If errors are detected, the Insight Display screen glows amber, and the Health Summary screen
appears. See
configuration and installation errors.
NOTE:
immediately.
8. Open a browser and connect to the active Onboard Administrator module using the Onboard
Administrator IP address that is configured during the Insight Display Installation Wizard
process.
9. Enter the user name and password from the tag supplied with the Onboard Administrator
module to access the remote Onboard Administrator web interface and complete the Onboard
Administrator First Time Installation Wizard.
22 HP Integrity Superdome 2 Insight Display
"Insight Display errors" (page 30)
Any configuration error prevents the operation of the enclosure and must be corrected
for more information on troubleshooting