Deleting a fabric
If you decide you no longer want the Management application to discover and monitor a specific
fabric, you can delete it. Deleting a fabric also deletes the fabric data on the server (both system
collected and user-defined data) except for user-assigned names for the device port, device node,
and device enclosure information.
To delete a fabric, complete the following steps.
1. Select Discovery > Setup.
2. Select the fabric for which you want to delete from the Discovered Addresses table.
3. Click Delete.
Host discovery
The Management application enables you to discover individual hosts, import a group of Host from
a comma separated values (CSV) file, or import all hosts from discovered fabrics.
NOTE
Host discovery requires HCM Agent 2.0 or later.
NOTE
SMI and WMI discovery are not supported.
Discovering Hosts by IP address or hostname
To discover a Host by IP address or hostname, complete the following steps.
1. Select Discover > Setup.
2. Click Add Host.
DCFM Professional User Manual
53-1001773-01
The Discover Setup dialog box displays.
You are prompted to confirm that you want to delete the fabric.
The Discover Setup dialog box displays.
The Add Host Discovery dialog box displays.
FIGURE 22
Add Host Discovery dialog box - Host tab
2
Host discovery
43