Step
3.
Enable the GR capability for
RIPng.
Displaying and maintaining RIPng
Execute display commands in any view and reset commands in user view.
Task
Display configuration information of a RIPng
process.
Display routes in the RIPng database.
Display the routing information of a specified
RIPng process.
Display RIPng interface information.
Reset a RIPng process.
Clear statistics for a RIPng process.
RIPng configuration examples
Basic RIPng configuration example
Network requirements
As shown in
Switch A and to forward only the route 4::/64 to Switch A.
Figure 74 Network diagram
Configuration procedure
1.
Configure IPv6 addresses for interfaces. (Details not shown.)
2.
Configure basic RIPng:
# Configure Switch A.
<SwitchA> system-view
[SwitchA] ripng 1
[SwitchA-ripng-1] quit
[SwitchA] interface vlan-interface 100
Figure
74, all switches run RIPng. Configure Switch B to filter the route 2::/64 learned from
Command
graceful-restart
Command
display ripng [ process-id ]
display ripng process-id database
display ripng process-id route
display ripng process-id interface [ interface-type
interface-number ]
reset ripng process-id process
reset ripng process-id statistics
293
Remarks
By default, RIPng GR is disabled.