In The Case Of Qr Code (Two-Dimensional Code) - Toshiba B-SX4T Series Specification

In the case of QR code (Two-dimensional code)

Format [ESC] XBaa; bbbb, cccc, d, e, ff, g, h (, Mi) (, Kj) (, Jkkllmm) (= nnn --- nnn) [LF] [NUL]
[ESC] XBaa; bbbb, cccc, d, e, ff, g, h (, Mi) (, Kj) (, Jkkllmm) (; oo
[LF] [NUL]
Term aa:
bbbb:
cccc:
d:
e:
ff:
g:
h:
Mi:
Kj:
Jkkllmm:
nnn --- nnn:
oo --- oo
1
Bar code number
00 to 31
Print origin of X-coordinate of the bar code
Fixed as 4 digits (in 0.1 mm units)
Print origin of Y-coordinate of the bar code
4 or 5 digits (in 0.1 mm units)
Type of bar code
T: QR code (Two-dimensional code)
Designation of error correction level
L: High density level
M: Standard level
Q: Reliability level
H: High reliability level
1-cell width
00 to 52 (in dots)
Selection of mode
M: Manual mode
A: Automatic mode
Rotational angle of the bar code
0: 0°
1: 90°
2: 180°
3: 270°
Selection of model
(Omissible. If omitted, Model 1 is automatically selected.)
i = 1: Model 1
2: Model 2
Mask number
(Omissible. If omitted, the number is automatically set.)
j = 0 to 7: Mask number 0 to 7
8: No mask
Connection setting
(Omissible. No connection if this parameter is omitted.)
kk = 01 to 16: Value indicating which divided code is connected.
ll = 01 to 16: Number of divided codes
mm = 00 to FF: A value for all data to be printed, to which XOR is applied
in units of bytes (Not divided)
Data string to be printed (Omissible)
Max. 2000 digits
: Link field No. (Omissible)
20
01 to 99 (1 to 99 can also be used.)
Up to 20 digits can be designated using commas.
- 106 -
, oo , oo ------ oo )
1 2 3 20