Important Safeguards - GE 106658 Instruction Manual

Lighted mirror
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT
SAFEGUARDS
THIS LIGHTED MIRROR HAS A
POLARIZED PLUG (ONE BLADE IS
WIDER THAN THE OTHER). AS A
SAFETY FEATURE, THIS PLUG WILL
FIT IN A POLARIZED OUTLET ONLY
ONE WAY. IF THE PLUG DOES NOT FIT
FULLY IN THE OUTLET, REVERSE THE
PLUG. IF IT STILL DOES NOT FIT,
CONTACT A QUALIFIED ELECTRI-
CIAN. NEVER USE WITH AN EXTEN-
SION CORD UNLESS PLUG CAN BE
FULLY INSERTED. DO NOT ATTEMPT
TO DEFEAT THIS SAFETY FEATURE.
THIS APPLIANCE IS INTENDED FOR
HOUSEHOLD USE. WHEN USING
ELECTRICAL APPLIANCES, BASIC
SAFETY
PRECAUTIONS
ALWAYS BE FOLLOWED, INCLUDING
THE FOLLOWING:
WARNING-
To reduce the risk of burns,
electric shock, fire, or injury to persons:
1. Read all instructions before using the
appliance.
2. To protect against electrical hazards,
do not immerse in water or other liq-
uids. Do not use while bathing.
3. Close supervision is necessary when
any appliance is used by or near chil-
dren or by invalids.
4. Unplug the appliance from outlet
when not in use and before cleaning.
Do not leave appliance unattended
when it is plugged in. Keep cord away
from heated surfaces.
5. Do not operate this appliance with a
damaged cord or plug or if the appli-
ance malfunctions or has been dropped
or damaged in any manner. Return
appliance to the place of purchase for ex-
change. No repairs should be attempted
by the consumer.
6. Use appliance only for intended use
as described in this instruction book.
7. Do not use outdoors or operate
where aerosol (spray) products are
being used, or where oxygen is being
administered.
8. Be sure mirror is not in a position
SHOULD
where it can reflect sunlight; reflected
sunlight can cause fire.
9. Do not drop or insert any object into
any opening as this may cause an elec-
trical hazard.
10. Do not block openings. Do not use
on a soft surface such as a bed, where
openings may be blocked.
11. Use on any 120 volt 60 hertz AC elec-
tric outlet (ordinary house current). Do
not use on any other electrical outlet.
12. Unplug and allow to cool before
replacing bulb.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents