Panasonic KV-S1026C Operating Manual page 28

Installation
Checking events
Check the following if an application does not start up after being set.
1. [Start] ® [Devices and Printers], right-click the scanner icon, and display the [Scan properties] screen.
•
If you are using Windows Vista:
[Start] ® [Control Panel] ® [Scanners and Cameras], select the scanner icon, and then click the
Properties button.
•
If you are using Windows XP:
[Start] ® [Control Panel] ® [Scanners and Cameras], right-click the scanner icon, and display the
Properties screen.
2.
Click the [Events] tab.
3.
Check that "Scan Button Setting Tool" is selected for "Send to this application" when each condition is
selected in "Scanner events".
•
If an application other than "Scan Button Setting Tool" is selected, change the application to "Scan
Button Setting Tool".
4.
Check that the "Disable device events" checkbox is unchecked.
•
If the checkbox is checked, uncheck it.
5.
Click [OK].
6.
Restart the computer.
28 Operating Manual