Table of Contents
Advertisement
2-10 Making a connection with TELNET.EXE
2
26
7) When the task or job is complete, enter
"LOGOUT" or "BYE" to cancel the connection
with the robot controller and press the Enter
key.
8) A message appears indicating the connection
has been disconnected.
Click any key to return to the screen in step 3.
9) To end the telnet.exe, enter "QUIT" following
the prompt (>) and press the Enter key.
n
NOTE
If you want to simultaneously control two or more robot controllers, start up TELNET.EXE as many times as
needed.
Advertisement
Table of Contents
