Attaching the Paper Support
Insert the paper support into the slots at the rear of the printer
as shown below.
Note:
To print on transparencies, you need to reposition the paper support
as described in "Loading Transparencies" in Chapter 7.
Choosing a Place for the Printer
Follow the guidelines listed below when placing your printer.
Place the printer on a flat, stable surface. The printer will
not operate properly if it is tilted or at an angle.
Place the printer close enough to the computer for the
interface cable to reach it easily.
Leave adequate room for easy operation and maintenance.
Leave enough room on the table at the front of the printer
to lower the output tray.
2-3
Getting Started
2