Changing The Programme; Intensive Drying; Interior Light - Siemens SN26T592GB Operating Instructions Manual

Changing the programme

When the START button )" has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme (Reset).

Intensive drying

The final rinse uses a higher temperature
which improves the drying result. The
running time may increase slightly.
(Caution if utensils are delicate!)
– Open the door.
– Switch on ON/OFF switch (.
– Hold down programme button # and
press START button )" until : .... is
indicated on the digital display.
– Release both buttons.
The LED for button # flashes and the
digital display 8 displays the factory
setting : .
– Press programme button # until the
factory set value :
the digital display 8.
To change the setting,
– Press the button 3 to switch the
Intensive drying on :
– Press START button )".
The set value is saved.
– Close the door.
is indicated on
or off : .

Interior light *

The interior light 1" comes on when the
door is opened irrespective of whether the
ON/OFF switch ( is switched on or off.
When the door is closed or ajar, the light is
off.
– Open the door.
– Switch on ON/OFF switch (.
– Hold down programme button # and
press START button )" until : .... is
indicated on the digital display.
– Release both buttons.
The LED for button # flashes and the
digital display 8 displays the factory
setting : .
– Press programme button # until the
factory set value :
the digital display 8.
To change the setting,
– Press the button 3 to switch the
interior light off :
– Press START button )".
The set value is saved.
– Close the door.
* depending on model
en
is indicated on
or on : .
19