Setting The Temperature; Alarm Function - Siemens GS32NS52 Instructions For Use Manual

Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperature has been
reached.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Fig. 2
Freezer compartment
The temperature can be set from –16 °C
to –32 °C.
Keep pressing temperature selection
button 2 until the required freezer
compartment temperature is set.
The value last selected is stored.
The set temperature is indicated on
display 3.
We recommend a factory setting of
–18 °C in the freezer compartment.

Alarm function

Switching off the warning signal
Fig. 2
Press the "alarm" button 4 to switch off
the warning signal.
Door alarm
The door alarm switches on if an
appliance door is left open for longer
than one minute. Close the door to
switch off the warning signal.
Temperature alarm
The temperature alam switches on if
the freezer compartment is too warm.
Alarm Temperature
button display
illumina flashes
tes
flashes flashes
flashes illuminates Thaw alarm:
en
Explanation
Temperature alarm:
Frozen food is
not at risk of
thawing.
Thaw alarm:
Frozen food is
at risk of thawing.
At some time
the freezer
compartment was
too warm. Frozen
food is at risk
of thawing.
9