Restoring Factory Settings - HP Codemaster 100 User Manual

9
10 Depress both sides of the ECG Size key simultaneously to return to the
11 To change settings in Setup Menu 2, select SETUP MENU 2 from the
12 Turn the Energy Select control to Off to exit Setup/Diagnostic mode.

Restoring Factory Settings

You can use the factory setting for most values by selecting RESTORE FACTORY
SETTINGS from the Setup/Diagnostic Menu. Highlighting and selecting this
setting does NOT bring up an additional menu. Selecting this line will undo user
configured parameters and restore factory defaults. This process restores factory
settings on the defibrillator/monitor and not on the 12-Lead option.
HP recommends that you not use the 12-Lead option to acquire, view, store,
WARNING
print or transmit when in Diagnostic Mode as the ECG may be lost and the
12-Lead capability may be reset.
Repeat steps 5 through 8 until you are finished configuring the settings in Setup
Menu 1.
Setup/Diagnostic Menu.
Setup/Diagnostic Menu and repeat the above steps.
Configuring the CodeMaster 100
2-9