Trunking Calls; Aking A T Elephone C All - Kenwood TK-5210 Instruction Manual

m t
Aking A elephone
■ Manual Dialing (K2/K3/K5/K6/K7 Models Only)
1 Press the key programmed as Autodial.
• The last called unit appears on the display.
• Press the A key to switch the display between the unit
name and the list number.
2 Press and hold the A key to enter Store & Send mode.
3 Enter your desired number using the DTMF keys.
Alternatively, you can select a digit by using the Side 1
•
and Side 2 keys or by rotating the selector knob, and then
set the selected digit by pressing the D> key. Repeat this
process to enter the entire number.
4 Press the PTT switch to make the call.
Alternatively, you can press the <C key to page the
•
selected unit, rather than making a call.
■ Selecting a Number from the List (K2/K3/K5/K6/K7 Models
Only)
1 Press the key programmed as Autodial.
• The last called unit appears on the display.
Press the A key to switch the display between the unit
•
name and the list number.
2 Press the Side 2 and Side 3 keys to select your desired
list number.
3 Press the PTT switch to make the call.
• Alternatively, you can press the <C key to page the
selected unit, rather than making a call.
34

TRUNKING CALLS

c
All