Installing Batteries - Bounty Hunter metal detector User Manual

Installing Batteries

Use 9-volt ALKALINE batteries only!
1. Remove the battery door from the underside of the detector.
2. Pull out the two battery connectors.
3. Snap on two 9-volt ALKALINE batteries.
Do not use Heavy Duty or ordinary Zinc Carbon batteries.
4. Place batteries into compartment one on top of the other.
5. Replace the battery door.
Slide over until it shuts securely in place.
All battery brands differ slightly in size.
If you want to secure the batteries more tightly in the
compartment, feed the battery wires underneath and between the
batteries.
If batteries fit too tightly, causing battery door to bulge, move
battery wires toward front of compartment, not between the
batteries.
2
push door
from side