Speco IP-INTB1 User Manual
  1. Manuals
  2. Brands
  3. Speco Manuals
  4. Security Camera
  5. IP-INTB1
  6. User manual

Speco IP-INTB1 User Manual

Network bullet cameras, network dome cameras
Hide thumbs Also See for IP-INTB1:
Table of Contents

Advertisement

Quick Links

Download this manual
Speco Technologies
IP Camera User's Manual
IP Camera User's Manual
(Version 1.2.1)
IP-INTB1 & IP-INTB2
Network Bullet Cameras
IP-INTD3 & IP-INTD4
Network Dome Cameras
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP-INTB1 and is the answer not in the manual?

Questions and answers

Related Manuals for Speco IP-INTB1

Summary of Contents for Speco IP-INTB1

  • Page 1 Speco Technologies IP Camera User’s Manual IP Camera User’s Manual (Version 1.2.1) IP-INTB1 & IP-INTB2 Network Bullet Cameras IP-INTD3 & IP-INTD4 Network Dome Cameras...
  • Page 2 Speco Technologies IP Camera User’s Manual IP-INTT5 & IP-T5 Network Traditional Cameras Introduction We appreciate your purchasing our IP Network Camera. This is a Network Camera with a built-in MPEG-4 CODEC and Streaming Server. It uses an MPEG-4 CODEC as the Video Compression method and has a built-in Streaming Server which allows you to monitor and record real time images in remote places over the Internet.
  • Page 3 Speco Technologies IP Camera User’s Manual Home Page : www.specotech.com Telephone : 631-957-8700 : 631-957-9142 Address : 200 New Highway, Amityville, NY 11701 Appearance, function and specification may be changed without prior notification. Our company assumes no responsibility for visible or invisible loss resulted from changes in policy or products.

  • Page 4: Important Notes

    Speco Technologies IP Camera User’s Manual Important Notes The Network Camera may be damaged by electrical and physical shock Do not try to disassemble the products. Contact or consult the distributor or Head Office for after sale service. There may be no Quality Assurance for the products disassembled arbitrarily.

  • Page 5: Table Of Contents

    Speco Technologies IP Camera User’s Manual Contents FEATURE..................11 1.1......................11 ACKAGE 1.2..............12 IMENSION AND AMERA EATURE 1.2.1. Dimension............................12 1.2.2. Camera Feature (Not available with IP-T5) ................15 INSTALL AND VIDEO CHECK ............19 2.1. NSTALLATION ....................19 2.2.
  • Page 6 Speco Technologies IP Camera User’s Manual 3.2. ) ........26 NSTALLATION WITHOUT SHARING DEVICE OUTER 3.2.1. Static IP Setup ..........................26 3.2.2. Dynamic IP Setup........................... 31 3.3. IP S ) ........33 NSTALLATION WITH HARING EVICE OUTER 3.4......................37 AUTIONS EXPERT SETTING................
  • Page 7 Speco Technologies IP Camera User’s Manual 4.6. DIO S IP-INTT5/T5 ).......... 54 ETTING SUPPORT FOR ONLY 4.7..................55 OTION ETUP 4.8. PTZ C )..........56 AMERA ETTING SUPPORT FOR AMERA 4.9..................57 OMEPAGE PDATE 4.10................... 58 IRMWARE PDATE 4.10.1.
  • Page 8 Speco Technologies IP Camera User’s Manual 5.4.4. Change of User’s Information ....................102 5.4.5. Search Camera........................... 103 5.5. PDA ........104 EE AND ONTROL OF TILL MAGE IN OBILE OR 5.5.1. WAP2.0 (HTML) ........................... 105 5.5.2. PDA(WinCE) ..........................107 5.6. NVR P ..................109...
  • Page 9 Speco Technologies IP Camera User’s Manual...
  • Page 10 Speco Technologies IP Camera User’s Manual 1. Feature...

  • Page 11: Feature

    Speco Technologies IP Camera User’s Manual Feature 1.1. Package Software CD IP/Network Camera Quick Install Guide Cross LAN Cable Accessory Show power cable Package of Products is composed of main body of product, Software CD (NVR Program, IP Utility, Product Manual, NVR Manual) , Quick Install Guide, Cross LAN Cable, Accessory, 12V DC Adapter.

  • Page 12: Dimension And Camera Feature

    Speco Technologies IP Camera User’s Manual 1.2. Dimension and Camera Features 1.2.1. Dimensions 1) Bullet Camera ① ② ③...
  • Page 13 Speco Technologies IP Camera User’s Manual 2) Dome Camera 3) Traditional Camera...
  • Page 14 Speco Technologies IP Camera User’s Manual ② ① ③ Power Port: Power connection port (12 VDC) VIDEO Port : Video Output Port (BNC) LAN Port: LAN Connection Port ( Connect with LAN Cable for Local Network or Internet Viewing) LINK: LED On (When the product connects with LAN Cable)

  • Page 15: Camera Feature (Not Available With Ip-T5)

    IP Camera User’s Manual 1.2.2. Camera Feature (Not available with IP-T5) SLC ( Speco Light Compensation ) : When the image is in front of strong background lighting, your camera allows you to get a clear image. Intensifier: 1/3 inch double density CCD and digital processor permit high quality pictures to be captured in very low light conditions.
  • Page 16 Speco Technologies IP Camera User’s Manual Electronic Day/Night: Allows the camera to always remain in color or to switch into B/W at night. Manual/DC Lens : You can choose MANUAL or DC LENS by using this switch.
  • Page 17 Speco Technologies IP Camera User’s Manual 2. Install and Check Video...
  • Page 18 Speco Technologies IP Camera User’s Manual...

  • Page 19: Install And Video Check

    Speco Technologies IP Camera User’s Manual Install and Check Video 2.1. Installation Connect the IP Camera to the PC by LAN cable (Crossover Cable) Supply power to the camera using a 12 volt DC regulated power supply. Wait approximately 2 minutes until the Link/LED light comes on.
  • Page 20 Speco Technologies IP Camera User’s Manual Fig. 2―1 Network Setting of User PC Set IP Address, Subnet Mask and Gate-way of User’s PC with 192.168.1.50, 255.255.255.0 and 192.168.1.1 as shown on [Fig. 2-1]. Fig. 2―2 Web Browser Input Run Web Browser as [2-2] and input 192.168.1.7 in URL and click “Enter”, then [2-3] is shown. In case [2-3] does not appear, re-set Hardware (Reset Button in Camera) to reboot and run Web Browser, input 192.168.1.7 in URL line and click “Enter”...
  • Page 21 Speco Technologies IP Camera User’s Manual Fig. 2―3 THE CAMERA Main Page Click “Connect” Button of [Fig. 2-3]. Fig. 2―4 User login Input ID and Password on [Fig. 2-4] to see Video. User’s Authority to see Video on THE CAMERA is as follows ;...
  • Page 22 Speco Technologies IP Camera User’s Manual Table 2-1 User ID, Password, Rights User ID User Password Rights Guest Guest Monitor only Monitor, Control of P/T/Z, Control of (select models only) Relay Audio Audio Monitor, Hearing (select models only) Iaudio Iaudio...
  • Page 23 Speco Technologies IP Camera User’s Manual Upon installation, Web Viewer [Fig. 2-6] appears and the image of the Camera can be seen. Fig. 2―6 Web Viewer After checking proper operation as seen on [Pic 2-6], go onto the next Chapter (3) Basic Setting.
  • Page 24 Speco Technologies IP Camera User’s Manual 3. Basic Setting...

  • Page 25: Basic Setting

    Speco Technologies IP Camera User’s Manual Basic Setting 3.1. Check Network and Installation Type This Chapter is for basic setting of THE CAMERA. To install Hardware of the Network Camera, basic Please refer to Chapter 6 in case knowledge of Network understanding of Networking is required.

  • Page 26: Installation Without Ip Sharing Device (Router)

    Speco Technologies IP Camera User’s Manual -> Should set up with Static IP. Refer to ‘Installation with IP Sharing Device’. 3.2. Installation without IP sharing device (Router) 3.2.1. Static IP Setup After checking Video in ‘Video Check’, go to the next step.
  • Page 27 Speco Technologies IP Camera User’s Manual Fig. 3―1 Main Page of THE CAMERA Network Camera Click ‘Administrator’s Page’ of [Fig. 3-1], then Browser shows [3-2] Log-in Page. Fig. 3―2 Administrator Page Log-in Put ‘admin’ in ID and Password line, click ‘Login’, then [3-3] ‘Administrator's Page’ will be shown.
  • Page 28 Speco Technologies IP Camera User’s Manual Fig. 3―3 Administrator’s Page Click “Network Setting’ in left menu on [3-3], [3-4] appears. Click ‘Static IP Address’ in ‘IP Setting’ of [3-4], and input IP Address, Subnet Mask, Default Gateway according to Network environment to connected THE CAMERA to.
  • Page 29 Speco Technologies IP Camera User’s Manual Fig. 3―4 Network Setting Click ‘Click Here’ upon appearing of IP Change Window of [3-5]. IP Change loading Page appears as [3-6], the Main Page of changed address is connected. (Note: You may not find the main page of changed address under Cross...
  • Page 30 Speco Technologies IP Camera User’s Manual Pic 3―5 IP Change Fig. 3―6 IP Change loading Page Remove LAN Cable (Cross Cable) connected between THE CAMERA and PC. Connect THE CAMERA to Network with LAN Cable (Straight Cable). Connect PC to Network with LAN Cable (Straight Cable)..

  • Page 31: Dynamic Ip Setup

    Speco Technologies IP Camera User’s Manual click ‘Enter’, Check if IP Setting is correct or not, referring to ‘Video Check’ If Video is seen, THE CAMERA has been correctly set up. If Video is not seen, check whether there may be a conflict of IP in the Network, and re-check the set value of Network environment of THE CAMERA, and Network environment of User’s PC.
  • Page 32 Speco Technologies IP Camera User’s Manual Fig. 3―7 Network Setting Click on ‘Dynamic IP Address’ in ‘IP Setting’. Click ‘Save’ Button. Upon completion of setting, close the Web Page and find IP of THE CAMERA in ‘IP Utility’ program provided with Proprietary Viewer (see ‘5. Basic Use’) If the IP is found, THE CAMERA has been given an IP.

  • Page 33: Installation With Ip Sharing Device (Router)

    Speco Technologies IP Camera User’s Manual After registration of THE CAMERA in Service Server (refer to ‘Use of Service Server’ of ‘ 5. Basic Use’, connect to THE CAMERA by Domain Name (Server Name) allocated to THE CAMERA. For example, run Web Browser and input Domain Name allocated to THE CAMERA in URL. In http://IPXXXXX.ipcam4u.net, ‘IPXXXXX’...
  • Page 34 Speco Technologies IP Camera User’s Manual Check’. Go to Network Setting Page of Administrator’s Page as per 4), 5), 6), 7) of ‘Static IP Setup’. Click ‘Static IP Address’ in ‘IP Setting’ of [3-9], and input IP Address, Subnet Mask, Default Gateway according to Network environment to connected THE CAMERA to.
  • Page 35 Speco Technologies IP Camera User’s Manual connection, but IP has been changed.) Fig. 3―10 IP Change It is connected to the new IP set up, in 20 seconds after window of [3-11] appears. Check Video of THE CAMERA referring to ‘2.
  • Page 36 Speco Technologies IP Camera User’s Manual Fig. 3―12 Port Setting Set Port in Port Setting Page of [3-12]. It is required to set each different Port for many THE CAMERA Network Cameras under 1 Router. Click ‘Save’ Button to save set value.

  • Page 37: Cautions

    Speco Technologies IP Camera User’s Manual Fig. 3―13 Main Page of THE CAMERA After [3-13] appears, check Video of THE CAMERA referring to‘2. Install and Video Check’. Check 2 (Check from outside) After registration of THE CAMERA in Service Server (refer to ‘‘Use of Service...
  • Page 38 Speco Technologies IP Camera User’s Manual the port of THE CAMERA, then it will work properly. The port being used by THE CAMERA can be checked on ‘Port Setting’ of ‘Network Setting’ of ‘Administrator’s Page’. Port of THE CAMERA on ex-factory is set default as follows ;...
  • Page 39 Speco Technologies IP Camera User’s Manual...
  • Page 40 Speco Technologies IP Camera User’s Manual 4. Expert Setting...

  • Page 41: Expert Setting

    Speco Technologies IP Camera User’s Manual Expert Setting After registration of THE CAMERA in Service Server (refer to ‘Use of Service Server’ of ‘‘ 5. Basic Use’’, connect to THE CAMERA by Domain Name (Server Name) allocated to THE CAMERA. (For example, run Web Browser and input Domain Name allocated to THE CAMERA in URL.
  • Page 42 Speco Technologies IP Camera User’s Manual Fig. 4―2 Administrator’s Page...

  • Page 43: General Setting

    Speco Technologies IP Camera User’s Manual 4.1. General Setting Fig. 4―3 General Setting 4.1.1. Title Setting Fig. 4―4 Title Setting Server title is to be English without space.

  • Page 44: Administrator's Id And Password Change

    Speco Technologies IP Camera User’s Manual Click ‘Save’ Button to save title after input name. 4.1.2. Administrator’s ID and Password Change ※ Cautions : Change Administrator’s ID and Password and do not disclose the information to others. Administrator’s ID and Password should be English, within 20 characters, without space.

  • Page 45: User List And Delete

    Speco Technologies IP Camera User’s Manual PTZ + Control + Audio: Monitoring, Control of P/T/Z of Camera and Relay, Hearing Audio of Camera Server. (select models only) All : Monitoring, Control of Camera P/T/Z and Relay, two-way Audio Communication with Camera Server, (Preset available) Fig.

  • Page 46: Skip Login (Automatic Monitoring)

    Speco Technologies IP Camera User’s Manual 4.1.5. Skip Login (Automatic Monitoring) Fig. 4―9 Skip Login Tick on ‘Skip Login’ of [4-9], and click ‘Connect ID’ and save the value, then Web Viewer will appear automatically and Video of Camera can be seen upon connection to Home Page of THE CAMERA.

  • Page 47: Set Download Route Of Plug-In Type Activex

    Speco Technologies IP Camera User’s Manual Fig. 4―11 Current Time View In case THE CAMERA does not keep correct time, click ‘Update’ Button to get new time information from set time zone. 4.1.7. Set Download Route of Plug-in Type ActiveX This is to set how to download ActiveX of Web Viewer, locally or from outer Server designated.

  • Page 48: Network Setting

    Speco Technologies IP Camera User’s Manual Fig. 4―13 Select Language It supports both English and Japanese. Click ‘Save’ Button to save the set value after select the Language. Input ID and Password to connect Administrator’s Page, and go to ‘Home Page Update’->’Default Home Page Setting’->’Default’, and change the main Page and Login Page of THE CAMERA to the selected...

  • Page 49: Video Setting

    Speco Technologies IP Camera User’s Manual 4.3. Video Setting Fig. 4―14 Video Setting 4.3.1. Video Setting Select and tick on the Channel to use, input Video format (NTSC or PAL), Compressed resolution, Bit rate, Frame rate, Key frame. Video setting can be done automatically by pressing ‘High’, ‘Normal’, ‘Low’...
  • Page 50 Speco Technologies IP Camera User’s Manual Fig. 4―15 Video Setting To return to default of ex-factory, click ‘Default’ of ‘Video Default Setting’...

  • Page 51: Color Setting

    Speco Technologies IP Camera User’s Manual 4.4. Color Setting This is to adjust color of channel. Fig. 4―17 Display Color Setting Upon adjustment of color on [4-17], then click ‘Save’ to save the setting value. In case to return to default, click ‘Default’...
  • Page 52 Speco Technologies IP Camera User’s Manual ‘Enable’ in ‘Alarm’. Fig. 4―18 Alarm Setting Designate condition to drive Event in ‘Alarm Condition’, such as Sensor Event, Motion detection Event or Sensor + Motion detection Event, If Sensor Event is selected, make Sensor settings Upon event situation after setting on ’Enable’...

  • Page 53: Alarm Event Test

    Speco Technologies IP Camera User’s Manual Alarm Server (refer to ‘‘Use of Service Server’ in ‘ 5. Basic Use) 4.5.2. Alarm Event Test Click ‘Test’ of [4-18], THE CAMERA will work as if Alarm has happened. In case selected ‘Alarm Style ->’Alarm Server’, Event is to be notified to Alarm Server and is to recorded into the recorded file (10...

  • Page 54: Dio Setting (Support For Ip-Intt5/T5 Only)

    Speco Technologies IP Camera User’s Manual 4.6. DIO Setting (support for IP-INTT5/T5 only) Fig. 4―19 DIO Setting Tick on sensor to use and select type of sensor to use. Sensor Type : designate type of sensor, NC, NO. Designate name of sensor to use.

  • Page 55: Motion Area Setup

    Speco Technologies IP Camera User’s Manual 4.7. Motion Area Setup (1) Motion Area Set: Press the set button. Place the mouse curser on this area and drag it out to the desired area. (2) Area Clear: Cancel the former area established.

  • Page 56: Camera Setting(Support For Ptz Camera)

    Speco Technologies IP Camera User’s Manual 4.8. Camera Setting(support for PTZ Camera) Fig. 4-20 Camera Setting It is available to pre-set Pan/Tilt/Zoom Cameras. Preset Setting is available up to 20, but may be less than 20 for some model of Camera.

  • Page 57: Homepage Update

    Speco Technologies IP Camera User’s Manual (6) Tour Move: to move to the selected preset number. (7) Pattern No: to select the Pattern Number to set up. (8) Pattern Move: to move to the selected Pattern number. (9): Adjustment of Pan/Tilt/Zoom/Speed/Focus: to move to the location to preset by adjusting Pan/Tilt/Zoom/Focus.

  • Page 58: Firmware Update

    In case firmware is upgraded in the future, Upgrade Server (http://ipcam4u.net) will automatically upgrade Firmware of THE CAMERA. Upgrade is only supported through Network. Information on latest version of THE CAMERA will be posted in Data Room of Speco Technologies Homepage. (http://www.specotech.com) 4.10.1.
  • Page 59 Speco Technologies IP Camera User’s Manual Fig. 4―23 Firmware Update THE CAMERA will be automatically upgraded upon clicking ‘Download’ button of [4-23] after connecting to Upgrade Server and checking version. Fig. 4―24 Firmware Download ‘Downloading’ message will be shown until completion of Update as [4-24] (it may take time according to Network situation).
  • Page 60 If user found [4-27], there is a error in connection to Upgrade Server, re-check Internet Connection or re-check DNS Server Address in ‘3. Basic Setting’ and try to upgrade again. If user keep finding [4-27] or can’t upgrade, contact head office of Speco Technologies Fig. 4―27 Upgrade Server Connection Error...

  • Page 61: 4.10.2. System Re-Booting

    Speco Technologies IP Camera User’s Manual 4.10.2. System Re-booting This is the function to re-boot Inner Software of THE CAMERA. Click ‘Restart’ on [4-41] ‘System Restart’ to reboot all inner program of THE CAMERA.

  • Page 62: Factory Reset

    Speco Technologies IP Camera User’s Manual 4.11. Factory Reset 4.11.1. Reset Button Press reset button for 1sec to be operated.(Red Circle) Bullet Camera Traditional Camera Dome Camera Fig. 4―28 Factory reset button 4.11.2. In reset of Factory default Changed to [192.168.1.7] of IP Address.
  • Page 63 Speco Technologies IP Camera User’s Manual Changed to [192.168.1.1] of Gateway. Changed the Server Login Port No. to “Default”. Changed Web Admin Password to initial data. Initialized DNS Number. 5. Basic Use...

  • Page 64: Basic Use

    Speco Technologies IP Camera User’s Manual Basic Use 5.1. Use of Web Viewer Fig. 5―1 Web Viewer Table. 5-1 Definition of Web Viewer Button Function Display Screen reduced by 50%. Display Screen at 100%. Double-clicking mouse on enlarged screen has the same function.
  • Page 65 Speco Technologies IP Camera User’s Manual Capture a selected channel into a BMP file Select Relay to control. Relay name is taken from the Camera Server Relay ON Relay OFF Select Preset to control Select Tour to control Select Pattern to control Move to the selected Preset/Tour/Pattern.
  • Page 66 Speco Technologies IP Camera User’s Manual Flickering on Screen and Upon detection of a motion event, the border around the associated Alarm Sound camera picture will flash and an alarm will beep. To stop the sound, double-click on the flashing screen.

  • Page 67: Use Of Osd (Not Available With Ip-T5)

    Speco Technologies IP Camera User’s Manual Pan/Tilt of Camera Pressing on the direction Key makes Camera move to the direction. Un- pressing stops moving. ⑤ Same function as Zoom-in, Zoom-out Function ⑥ ‘+’ is Zoom In, Pressing the key makes doing the function. Un-pressing stops the function ‘-‘...

  • Page 68: Function

    Speco Technologies IP Camera User’s Manual 5.2.1. Function SETUP MENU LENS option ●DC ●MANUAL SHUTTER ●OFF ●F/L ●MANUAL WHITE BALANCE MIDDLE HIGH AUTO GAIN ●OFF ●ON REDUCE NOISE ●OFF ●LOW ●MIDDLE ●HIGH INTENSIFIER ●AUTO ●OFF NEXT PAGE ●CAMERA TITLE ●COLOR ●SYNC ●PRIVACY ●MIRROR...
  • Page 69 Speco Technologies IP Camera User’s Manual DOWN SETUP When you control by the five keys on the Webviewer GUI refer to the following...
  • Page 70 Speco Technologies IP Camera User’s Manual...

  • Page 71: Operating Camera Osd Menu

    Speco Technologies IP Camera User’s Manual 5.2.3. Operating Camera OSD Menu 1. Press the SET button to access the SETUP mode. SET UP menu is displayed on the monitor screen. 2. Select the desired feature using the UP or DOWN button.
  • Page 72 Speco Technologies IP Camera User’s Manual...
  • Page 73 Speco Technologies IP Camera User’s Manual 1) Setting up the LENS Select the lens pressing the RIGHT button. ① On the SETUP menu screen, move the arrow indicator to the lens th UP DOWN b tt ② Select the desired feature using the LEFT or RIGHT button.
  • Page 74 Speco Technologies IP Camera User’s Manual ▶When DC LENS selected, press SET button to control the BRIGHTNESS.
  • Page 75 Speco Technologies IP Camera User’s Manual 1) Shutter status and speed control You can control brightness of the screen by the shutter speed. ① Press the SET button to display the setup menu and move the arrow indicator to ‘SHUTTER’ using the UP or DOWN button.
  • Page 76 Speco Technologies IP Camera User’s Manual ▶MANUAL : When setting shutter speed manually. (Only for LENS mode) select speed from ‘1/60’ ‘1/200 000’...
  • Page 77 Speco Technologies IP Camera User’s Manual ▶ESC : You can control the BRIGHTNESS. ③When completed, press ‘SET’...
  • Page 78 Speco Technologies IP Camera User’s Manual 3) SLC (Speco Light Compensation) - BACKLIGHT A built-in SR chip provides intelligent light level control to overcome severe Backlight conditions. ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘BACKLIGHT’...
  • Page 79 Speco Technologies IP Camera User’s Manual 3) AUTO GAIN CONTROL (AGC) AGC is to get bright picture. Higher GAIN level, getting brighter screen. But you can get noise increase ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘AGC’...
  • Page 80 Speco Technologies IP Camera User’s Manual 5) WHITE BALANCE (WHITE BAL.) For color control on the screen, use ‘WHITE BALANCE’ function. ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘WHITE BALANCE’ using the UP or DOWN button.
  • Page 81 Speco Technologies IP Camera User’s Manual ▶MANUAL : To fine adjust, select the Manual mode. You can increase or decrease the red or blue factor while monitoring the difference on the screen. Set to ‘MANUAL’ mode and press the SET button. Increase or...
  • Page 82 Speco Technologies IP Camera User’s Manual 6) Digital Noise Reduction (Dynamic Noise Reduction) DNR is to reduce the noise on the screen. ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘DNR’ using the UP or DOWN button.
  • Page 83 Speco Technologies IP Camera User’s Manual 7) INTENSIFIER Allows you to get clear images with this function under night li ht diti ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘Intensifier’ using the UP or DOWN button.
  • Page 84 Speco Technologies IP Camera User’s Manual 8) NEXT PAGE ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘Intensifier’ using the UP or DOWN button. ② SET ‘Intensifier’ to the desired mode using the LEFT or RIGHT button (A) CAMERA TITLE ①...
  • Page 85 Speco Technologies IP Camera User’s Manual ③ Press SET button to access the SETUP mode. ④ You can enter up to 15 characters. a. Move the cursor to character-enter location by using the LEFT or RIGHT button. b. Select the desired character by using the UP or DOWN button.
  • Page 86 Speco Technologies IP Camera User’s Manual B) COLOR d B/W (OPTION) ▶ ON : color mode ▶ OFF : B/W mode ▶ AUTO : generally color mode, B/W mode in low luminance. Notes OSD Key may not work for 3 seconds when the COLOR/ BW mode is changed.
  • Page 87 Speco Technologies IP Camera User’s Manual C) SYNC Two SYNCHRONIZATION modes are available… INTERNAL and EXTERNAL LINE-LOCK. In LINE-LOCK mode, the camera syncs to the 60 Hz phase. ① Press the SET button to display the setup menu and move the arrow indicator to ‘SYNC’...
  • Page 88 Speco Technologies IP Camera User’s Manual...
  • Page 89 Speco Technologies IP Camera User’s Manual D) PRIVACY To mask an area that you want to be private. ① Press the SET button to display the setup menu and move the arrow indicator to ‘PRIVACY’ using the UP and DOWN button.
  • Page 90 Speco Technologies IP Camera User’s Manual E) REVERSE ① Press the SET button to display the setup menu and move the arrow indicator to ‘REVERSE’ using the UP and DOWN button. ② SET ‘REVERSE’ to the desired mode using the LEFT or RIGHT button ▶OFF : Deactivation...
  • Page 91 Speco Technologies IP Camera User’s Manual F) DETAIL ① Press the SET button to display the setup menu and move the arrow indicator to ‘DETAIL’ using the UP and DOWN button. ② SET ‘DETAIL’ to the desired mode using the LEFT or RIGHT button ▶OFF : Deactivation...

  • Page 92: Use Of Ip Setting Utility

    Speco Technologies IP Camera User’s Manual G) DEFAULT : Use to reset your camera to FACTORY DEFAULT SETTING. H) PAGE1 : PAGE 1 : Save the setting of NEXT PAGE function, and then 5.3. Use of IP Setting Utility Upon running IP Setting Utility, the following program is to be displayed.
  • Page 93 Speco Technologies IP Camera User’s Manual Fig. 5―3 Display IP The following window shows list of IP along with Web Server Port Number and Model Name of THE CAMERA. Click ‘IP Find’ Button to find IP of THE CAMERA on local Network.

  • Page 94: Use Of Service Server

    Speco Technologies IP Camera User’s Manual Fig. 5―5 IP Check Input new IP Address, Default Gateway, Subnet Mask, and then input Password of THE CAMERA Administrator and click ‘IP Change’, to set up new IP of THE CAMERA. Upon completion of setting, find new IP and click ‘Ping’...
  • Page 95 Speco Technologies IP Camera User’s Manual Fig. 5―6 Service Server Click the language user want to use.

  • Page 96: User Registration

    Speco Technologies IP Camera User’s Manual 5.4.1. User Registration Fig. 5―7 User Login Click ‘Register Now’ in [5-7].
  • Page 97 Speco Technologies IP Camera User’s Manual Fig. 5―8 Agreement Read the Agreement carefully and click ‘Agree’ in case to agree, and go to the next page.
  • Page 98 Speco Technologies IP Camera User’s Manual Fig. 5―9 User Registration The part marked with is mandatory. User ID is to be double-checked. Then click ‘Log In’. Fig. 5―10 User Registered...

  • Page 99: Camera Registration

    Speco Technologies IP Camera User’s Manual If [5-10] appears, User Registration has successfully completed. Click ‘Log-in’ and input User ID and password on [5-7] to connect to Service Server. Fig. 5―11 Service Server Log-in Succeeded 5.4.2. Camera Registration Click ‘To register camera’ in [5-11] to go to Camera Registration Page.
  • Page 100 Speco Technologies IP Camera User’s Manual Input name of THE CAMERA in ① of [5-12], which will be applied only in Service Server. ② Server Name is to input Domain Name to connect to THE CAMERA. Make this name easy to remember because you can use it to connect to THE CAMERA by Domain Name in case not knowing IP address of THE CAMERA.

  • Page 101: List Of Camera

    Speco Technologies IP Camera User’s Manual (refer to ‘Alarm Setting’ of ‘4. Expert Setting’). It’s available to input up to 5 Mobile Phone to get SMS Message and input up to 5 messages upon checking on ‘ENABLE’. Cautions : Input Mobile Phone Number without ‘-‘.

  • Page 102: Change Of User's Information

    Speco Technologies IP Camera User’s Manual the new information. ‘MAC’ is not changeable. To change ‘Server Name’, double-check is required. Upon clicking ‘Camera Connect’ on [5-14], the main page of THE CAMERA will appear. Upon clicking ‘Alarm Log List’ on [5-14], Event information transmitted to Service Server is to be displayed.

  • Page 103: Search Camera

    Speco Technologies IP Camera User’s Manual user’s information. Fig. 5―17 Change User’s Information Save User’s information by clicking ‘To Change Information’ after change user’s information. 5.4.5. Search Camera Fig. 5―18 Search Camera ‘Search Camera’ of [5-18] is the function to see information of THE CAMERA or connect directly to THE CAMERA without user registration in Service Server.

  • Page 104: See And Control Of Still Image In Mobile Or Pda

    Speco Technologies IP Camera User’s Manual CAMERA using MAC Address, and then to input MAC Address of THE CAMERA and click ‘Yes’, then THE CAMERA will be directly connected. Fig. 5―19 Search Camera If user want to see information of THE CAMERA by the Address, select ‘Information’ and input MAC Address of THE CAMERA to see information on, and click ‘confirmation’...

  • Page 105: Wap2.0 (Html)

    Speco Technologies IP Camera User’s Manual 5.5.1. WAP2.0 (HTML) Connect to URL input line. Input http://ipcam4u.net/240180.htm or http://ipcam4u.net/320240.htm and connect to Service Server. Fig. 5―21 Input User ID On user ID input Page [5-21], input user’s ID registered in ‘Use of Service Server ’ of ‘5. Basic Use’.
  • Page 106 Speco Technologies IP Camera User’s Manual Fig. 5―23 Menu Select a item in menu of [5-23]. (1) Monitoring and Control of Pan/Tilt/Zoom/Preset Fig. 5―24 Pan/Tilt/Zoom Control It is available to see Image and control Pant/Tilt/Zoom/5 Preset. Number Key of Mobile Phone controls Pan/Tilt/Zoom.

  • Page 107: Pda(Wince)

    Speco Technologies IP Camera User’s Manual It is available to control up to 2 Relay. Relay Name and current status ([ON/OFF]) will be displayed. On control of Relay, Image of controlled channel will be shown along with Relay name of the channel, ON/OFF is to be controllable.
  • Page 108 Speco Technologies IP Camera User’s Manual Fig. 5―25 PDA Log-in On user ID Input Page [5-25], input user’s ID registered in ‘Use of Service Server ’ of ‘5. Basic Use’ and click ‘connect’ to log in. Fig. 5―26 Products List Select one of the products (Camera or Server) registered by user, in Products List of [5-26].

  • Page 109: Use Of Nvr Program

    Speco Technologies IP Camera User’s Manual 5.6. Use of NVR Program 5.6.1. Required Specification of PC and OS Item Min. Requirement Recommended Specification Pentium Ⅳ 2.0G Pentium Ⅳ 2.4G or higher Main Memory 256MB 512MB or higher Windows 2000/XP Windows 2000/XP Web Browser I.E 5.0...
  • Page 110 Speco Technologies IP Camera User’s Manual 6. Network Environment...
  • Page 111 Speco Technologies IP Camera User’s Manual...

  • Page 112: Network Environment

    Speco Technologies IP Camera User’s Manual Network Environment It is required to follow the recommendation of the environment where THE CAMERA will installed or the similar environment 6-1. Private line Environment Usually Company, University, Research center use the leased line. They use many public IP addresses.
  • Page 113 Speco Technologies IP Camera User’s Manual device. We recommend to use a IP router (IP Sharing device) to install the THE CAMERA. There may be a case in no need of router, but most people use THE CAMERA and other PC 1set or more. When using the router, connect the router and input IP address of THE CAMERA (IP address of THE CAMERA is set as 192.168.1.7 on ex-factory) in DMZ menu.
  • Page 114 Speco Technologies IP Camera User’s Manual 7. Appendix...
  • Page 115 Speco Technologies IP Camera User’s Manual...

  • Page 116: Appendix

    Speco Technologies IP Camera User’s Manual Appendix Appendix A Basic Setting Table Item Default (Basic Setting) Remarks Network Setting Static IP / Dynamic IP Static IP IP Server Enable IP Address 192.168.1.7 Gateway 192.168.1.1 Subnet Mask 255.255.255.0 Web Connection Port *.
  • Page 117 *. Note : In case to reset Hardware, Network Setting, User and Administrator’s ID and Password will be automatically returned to above default value. Appendix B Specification of Products B-1 IP-INTB1 / INTB2 Image Sensor 1/3" Sony Super HAD CCD, 410,000 pixels...
  • Page 118 Speco Technologies IP Camera User’s Manual PDA Viewer@PC Yes(option) Program Viewer@Mobile Phone Yes(option) NVR@PC Global/Private/Static/Dynamic IP DDNS Support Network Encryption (ID/PW/Image) Interface 10/100Mbps Concurrent Users Manual Recording Schedule Motion Detection Sensor event Event& Sensor Trigger/Motion Detection Alarm Alarm Notification SMS/E-MAIL/Alarm Sound(option) Video Output 1.0 Vp-p 75 ohm Composite...
  • Page 119 Speco Technologies IP Camera User’s Manual Reduce Noise Low/ Middle/ High/ Off Maximum Frame Rate 121fps(352*240) 704*480 704*240 Image Sizes 352*480 352*240 Frame Rate 30, 15, 10, 7, 6, 5, 4, 3, 2, 1 fps(10 Steps) On Screen Display(O.S.D) Built-in...
  • Page 120 Speco Technologies IP Camera User’s Manual Horizontal resolution 540 TV Lines Minimum Illumination 0.002 Lux(selectable limit ~ X128) S/N Ratio 50dB(Weight On) Lens C/CS Mount Lens selectable Scanning System 2:1 Interlaced Synchronization Internal Compression MPEG4 / JPEG Multi-Streaming MPEG4(2ch), JPEG(1ch)
  • Page 121 Speco Technologies IP Camera User’s Manual Memory 256MB+ (512MB+ recommended) B-4 IP-T5 Image Sensor 1/3" Panasonic CCD, 410,000 pixels NTSC 811(H)*508(V) Total Pixel 795(H)*592(V) Effective NTSC 768(H)*494(V) Pixel 755(H)*582(V) Horizontal resolution 480 TV Lines Minimum Illumination 0.5 Lux S/N Ratio...
  • Page 122 Speco Technologies IP Camera User’s Manual Power Source DC 12V Power Consumption (Max.) Operational Temperature -10 deg - +50 deg C RH95% MAX(14 deg F to 122 deg F) Weight 0.6kg Video Out Sensor In/Relay Out CONNECTIVITY Ethernet Jack RJ45(10Base-T/100Base-TX)
  • Page 123 Speco Technologies IP Camera User’s Manual In case camera uses dynamic/public IP: In this case, user cannot find camera IP address. So, reset hardware and connect PC with THE CAMERA through cross cable and ping test by “192.168.1.7”. In case camera uses private IP through IP sharing device: Ping-test private IP address set for THE CAMERA in PC that is connected in the local network through IP sharing device.

This manual is also suitable for:

Ip-intd3Ip-intd4Ip-intb2

Table of Contents