Gad 29; J291 Connector; Section 15 Lru Pinouts - Garmin G3X Installation Manual

15 LRU PINOUTS
Use the information in this section (along with other applicable sections/appendices in this document) to
construct the wiring required for the G3X installation.
Connector references JXXX(X) and PXXX(X) are used throughout this section and in Appendices C
through H. The letter "J" or "P" designates the connector (whether on the LRU or wiring harness). "J"
(Jack) refers to the connector on the LRU, and "P" (Plug) refers to the connector on the wiring harness.
"J" or "P" designate the connector only, regardless of contact type (pin or socket).

15.1 GAD 29

15.1.1 J291 Connector

Figure 15-1 J291 on GAD 29, as viewed looking at connector on unit
Pin
1 CAN HI
2 CAN LO
3 RESERVED
4 RESERVED
5 RESERVED
6 GROUND
7 AIRCRAFT POWER 1
8 AIRCRAFT POWER 2
9 GROUND
190-01115-01
Rev. L
Pin Name
G3X Installation Manual - LRU Pinouts
I/O
I/O
I/O
--
--
--
--
In
In
--
Page 15-1