3: Installing The Ubox; Installing The Ubox Hardware; Step 1- Connect The Ubox To Your Network; Step 2 - Connect The Ubox's Power Supply And Read The Leds - Lantronix UBOX 2100 User Manual

3: Installing the UBox

The UBox package has two components: the UBox hardware and the UBox software.
Both have their own settings and configuration options.
This chapter includes the following topics:

Installing the UBox Hardware

Warning:
finished installing the software and hardware. Chapter
Devices on the Network
devices.

Step 1- Connect the UBox to Your Network

2. Connect an Ethernet cable to the Ethernet port of the UBox.
2. Connect the other end of the cable to your network.
If you do not have a network, you can connect the UBox directly to the Ethernet
port on your computer using an Ethernet crossover cable.

Step 2 - Connect the UBox's Power Supply and Read the LEDs

1. Connect the power supply (included in the box) to the UBox's power connector.
Network
Connection
UBox User Guide
Installing the UBox Hardware
Installing the UBox Software
Uninstalling the UBox Device Server Software
Do not connect a USB device to the UBox until you have
walks you through the process of using your USB

Figure 3-1. Ethernet and Power Connections

UBox 2100
Power Supply
Power Supply
4: Using USB
UBox
Network
Connection
11