Detaching The Stand - LG 27MT93V Owner's Manual

14
ASSEMBLING AND PREPARING
Using the Kensington security system
The Kensington security system connector is
located at the back of the TV. For more information
of installation and using, refer to the manual
supplied with the Kensington security system or
visit http://www.kensington.com .
Connect the Kensington security system cable
between the TV and a table.
NOTE
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.

Detaching the Stand

1
Place the TV with the screen side down on a
flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth
y y
on the surface to protect the screen from
damage.
When detaching the stand to the TV,
y y
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
2
Open the screw cover on the back of the stand
base and use a screwdriver to remove the two
screws.
Detach the stand base from the stand hinge as
shown in the figure.