Hitachi CP-A100 User Manual page 13

3.1 Configuring and controlling the projector via a web browser (continued)
3.1.1 Logon
Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter "http://192.168.1.10/" into the address
bar of the web browser and press "Enter"
key or click "Go" button. The screen in Fig.
3.1.1a will be displayed.
2) Enter your ID and password and click
[Logon].
Below are the factory default settings for administrator ID, user ID and passwords.
Item
Administrator
User
If the logon is successful, either the Fig. 3.1.1 b or Fig. 3.1.1 c screen will be
displayed.
Main menu
Fig. 3.1.1 b "Logon with Administrator ID"
3) Click the desired operation or configuration item on the main menu located on
the left-hand side of the screen.
3. Management with Web browser software
ID
Administrator
User
Fig. 3.1.1 a "Logon Menu"
Password
<blank>
<blank>
Main menu
Fig. 3.1.1 c "Logon with User ID"
3