Adjust Brightness Of Display Panel; Turn On Or Off Led Light; Store Radio Stations Automatically; Find The Correct Video Input Channel - Philips DCD7010 User Manual

Note
•
The number key on the RC is deactivated in
this mode.
Adjust brightness of display
panel
1
Press DIM repeatedly to select different
brightness levels.

Turn on or off LED light

1
In power-on mode, press and hold DIM
to turn on or off the LED light at the
bottom of the unit or at the volume
knob.
Store radio stations
automatically
If no radio stations are stored, the unit can store
radio stations automatically.
1
Turn on the unit.
2
Press RADIO.
» [AUTO INSTALL ---- PRESS PLAY --
STOP CANCEL] (press
automatic installation, or press
cancel) is displayed.
3
Press .
» The unit automatically stores radio
stations with sufficient signal strength.
» After all available radio stations are
stored, the first stored radio station is
broadcast automatically.
Find the correct video input
channel
1
Turn on your unit.
2
Press DISC to select the disc source.
• Turn on the TV and switch to the
correct video-in channel.
•
See the user manual of your TV for how to
switch between video-in channels.

Select the correct TV system

This unit is compatible with both NTSC and
PAL. If the picture is abnormally displayed with
the default setting, select a TV system that
matches your TV. (Refer to "Setup" > "Video
Setup" > [TV Type] for details)
Select a language for on-
screen display
Chinese is the default language options for this
setting. (See "Setup" > "General Setup" > [OSD
LANGUAGE] for details)
to start
to
Note
EN 13