Table of Contents
Advertisement
QuickSpecs
Overview
HP Virtual Connect FlexFabric 10Gb/24-port Modules are the simplest, most flexible way to connect virtualized server blades to data or
storage networks. VC FlexFabric modules eliminate up to 95% of network sprawl at the server edge with one device that converges
traffic inside enclosures and directly connects to external LANs and SANs. Using Flex-10 technology with Fibre Channel over Ethernet
and accelerated iSCSI, these modules converge traffic over high speed 10Gb connections to servers with HP FlexFabric Adapters (HP
NC551i or HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapters or HP NC553i 10Gb 2-port FlexFabric Converged
Network Adapter). Each redundant pair of Virtual Connect FlexFabric modules provide 8 adjustable downlink connections ( six Ethernet
and two Fibre Channel, or six Ethernet and 2 iSCSI or eight Ethernet) to dual port10Gb FlexFabric Adapters on servers. Up to eight
uplinks are available for connection to upstream Ethernet and Fibre Channel switches. VC FlexFabric modules avoid the confusion of
traditional and other converged network solutions by eliminating the need for multiple Ethernet and Fibre Channel switches, extension
modules, cables and software licenses. Also, Virtual Connect wire-once connection management is built-in enabling server adds,
moves and replacement in minutes instead of days or weeks.
1.
Unit Identification Display LED
2.
Backlit Fibre Channel mode indicator
3.
Backlit port number and status indicator LED
4.
Port Link/Activity/Speed indicator
5.
Backlit up or X-link indicator
6.
Reset button
What's New
Virtual Connect v4.10 highlights for the Virtual Connect FlexFabric 10Gb/24-Port Module
Single Root - I/O Virtualization (SR-IOV)
IPv6 Management Support for HTTP, LLDP, FTP, SCP, SSH, Syslog, TACACS+ and RADIUS
Ability to hide unused FlexNICs
Auto deployment allows automated deployment of VC domain
Browser support includes - Internet Explorer 9 & 10 and Firefox 17 & 22
HP Virtual Connect FlexFabric 10Gb/24-Port Module
Figure 1 Virtual Connect FlexFabric Module Front Bezel
DA - 13652 Worldwide — Version 20 — November 5, 2013
7.
4x 1/10Gb Ethernet (SFP+)
8.
Backlit Ethernet mode indicator
9.
2x 10Gb Ethernet or 2/4/8 Gb Fibre Channel (SFP+)
10. Enter button
11. Module status indicator
Page 1
Advertisement
Table of Contents
Related Manuals for HP 571956-B21
Summary of Contents for HP 571956-B21
- Page 1 Overview HP Virtual Connect FlexFabric 10Gb/24-port Modules are the simplest, most flexible way to connect virtualized server blades to data or storage networks. VC FlexFabric modules eliminate up to 95% of network sprawl at the server edge with one device that converges traffic inside enclosures and directly connects to external LANs and SANs.
- Page 2 HP Virtual Connect FlexFabric 10/24 Enterprise Edition BLc7000 Option 605865-B21 NOTE: Includes 2 x HP Virtual Connect FlexFabric 10Gb/24-port modules plus 1 x VCEM BL-c7000 enclosure license. Customer will receive a printed license entitlement certificate and 2 Virtual Connect modules as a single deliverable.
-
Page 3: Supported Products
HP Integrity BL890c i4 Server Blade NOTE: Some servers listed above may be discontinued. NOTE: HP Integrity BL8x0c i2 servers require VC FW 3.0 or higher. HP Integrity BL8x0c i4 servers require VC FW 3.7 or higher. HP Network Adapters... - Page 4 HP BladeSystem c-Class c7000 Enclosure with Onboard Administrator NOTE: VC FlexFabric modules are not supported in BladeSystem c3000 enclosures. Enclosures Virtual Connect Firmware Virtual Connect Firmware v4.10 is recommended with the following release sets for HP ProLiant and HP Integrity environments HP ProLiant server blades HP Service Pack for ProLiant: Version SPP 2013.09.0 (B) or greater...
-
Page 5: Supported Configurations
Port mapping differs slightly between full height and half height server blades due to the support for additional Mezzanine cards on the full height version. HP has simplified the processes of mapping Mezzanine ports to switch ports by providing intelligent management tools via the Onboard Administrator and HP Insight Manager Software. The Onboard Administrator Guide and Enclosure Setup and Installation Guide provide detailed information on port mapping. -
Page 6: Hp Bladesystem C7000 Enclosure
Full Height Server Blade HP BladeSystem c7000 Enclosure NOTE: The following tables show a number of supported configurations for an HP BladeSystem c7000 Enclosure with Virtual Connect FlexFabric Modules. Not all possible combinations are shown here. NOTE: VC FlexFabric modules are not supported in HP BladeSystem c3000 enclosures. - Page 7 QuickSpecs HP Virtual Connect FlexFabric 10Gb/24-Port Module Supported Products [Bay 1] VC FlexFabric -> VC FlexFabric or Empty [Bay 2] Integrated FlexFabric Adapter [Bay 3] VC FlexFabric -> VC FlexFabric or Empty [Bay 4] FlexFabric Adapter Mezzanine [Bay 5] VC FlexFabric ->...
- Page 8 NOTE: Twinax direct attach copper (0.5 to 7m). 7m is not supported on ports X1-X4 NOTE: Direct Attach Copper cables listed in the options section below is fully supported by HP. HP recommends use of these cables. If not identified as a "supported" DAC, VC will allow the connection to proceed if the discovery process indicates the cable meets the following criteria: connector=copper pigtail;...
- Page 9 NOTE: Two (2) internal 10Gb links are provided between Virtual Connect modules in horizontally adjacent bays. Also, VC FlexFabric and VC Flex-10 configuration requires a HP ProCurve XFP to SFP+ 1m Direct Attach Copper Cable to connect an HP Virtual Connect FlexFabric Module and HP Virtual Connect Flex-10 Ethernet Module.
-
Page 10: Standard Features
Each FlexNIC and FlexHBA is recognized by the server as a PCI-e physical function device with adjustable speeds from 100Mb to 10Gb in 100Mb increments when connected to a HP NC553i 10Gb 2-port FlexFabric Converged Network Adapter or any Flex-10 NIC and from 1Gb to 10Gb in 100Mb... - Page 11 Virtual Connect Enterprise Manager (VCEM), provides a central console for multiple VC domains including up to 250 domains with 1,000 HP BladeSystem c-Class enclosures Optional HP 10Gb SFP+ SR, LR, and LRM modules and 10Gb SFP+ Copper cables in 0.5m, 1m, 3m, 5m, and 7m lengths...
-
Page 12: Service And Support, Hp Care Pack And Warranty Information
HP Foundation Care services offer scalable reactive support-packages for HP servers and software. You can choose the type and level of service that is most suitable for your IT and business needs. HP Proactive Care delivers high levels of system availability through proactive service management and advanced technical response. - Page 13 Learn more http://www.hp.com/go/hpsc HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime. HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty, HP Care Pack or HP contractual support agreement.
- Page 14 QuickSpecs HP Virtual Connect FlexFabric 10Gb/24-Port Module Service and Support, HP Care Pack and Warranty Information DA - 13652 Worldwide — Version 20 — November 5, 2013 Page 14...
- Page 15 NOTE: Requires single-mode fiber. HP BladeSystem c-Class 10Gb Long Range Mode Small Form-Factor Pluggable Option 455889-B21 HP BLc Virtual Connect 1Gb SX Small Form Factor Pluggable Option Kit 453151-B21 HP BLc Virtual Connect 1Gb RJ-45 Small Form Factor Pluggable Option Kit...
- Page 16 NOTE: Two 8Gb Shortwave FC transceivers are offered to allow consistency with those used in other VC 8Gb Fibre Channel Modules in your environment. HP 8Gb Shortwave B- series Fibre Channel 1 Pack SFP+ Transceivers (A716A) supports VC FC 8Gb 24-port modules.
- Page 17 HP Startup Blade System c-Class Enhanced Network Service UE603E Installation & Start-up Services recommended for the c3000 HP Startup c3000 with Insight Control and Operating System and Server Blade Service UF817E HP Startup BladeSystem c3000 + Operating System Service UF818E...
-
Page 18: Technical Specifications
QuickSpecs HP Virtual Connect FlexFabric 10Gb/24-Port Module Technical Specifications Shipping Dimensions Length 10.55 in (267.97 mm) Width 7.58 in (192.53 mm) Height 1.10 in (27.94 mm) Shipping Weight Approximately1.27Kg (2.8 Lbs) Product Specifications Performance Line Rate, full-duplex 240Gbps bridging fabric... - Page 19 QuickSpecs HP Virtual Connect FlexFabric 10Gb/24-Port Module Technical Specifications * All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048m (10,000 ft) or 70 Kpa/10.1 psia.
- Page 20 QuickSpecs HP Virtual Connect FlexFabric 10Gb/24-Port Module Technical Specifications Smart Link network senses a failed upstream switch connection and allows teamed NICs to properly failover. Configure uplink speeds to Auto, 1Gb,or10Gb on the associated uplinks VLAN Features 802.1Q VLAN supported on uplinks.
- Page 21 WWN Address Administration allows local administration of predefined WWN addresses ranges to allow pre-provisioning of SAN volumes VC manager runs as a high-availability pair when an HP VC Module is installed in the adjacent bay. All configuration data is stored in flash memory and checkpointed to the standby module.
- Page 22 QuickSpecs HP Virtual Connect FlexFabric 10Gb/24-Port Module Technical Specifications Management and Standards INCITS FC-BB-5 Rev 2.00 IEEE 802.1Qbb Standards Support IEEE 802.1Qaz IEEE 802.1AB LLDP IEEE 802.1Q (VLAN includes Native VLAN support and server side VLAN tag mapping) IEEE 802.2 LLC IEEE 802.3ad Link Aggregation...
- Page 23 The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.